Abstract
Thermal fatigue measurements have been carried out with aligned eutectic Co-Cr-Al-C alloys. The following were observed: (a) ripening; (b) partial carbide transformations; (c) irreversible strain effects. These effects have been evaluated qualitatively, and to explain the irreversible strain a model has been proposed in which both the differential thermal expansion between matrix and fibre and the deformation rate dependence of yield stress are considered.
Similar content being viewed by others
References
M. Gell, “Directionally Solidified In-situ Composites”, edited by E.R. Thompson and P.R. Sahm (AGARD, Washington D.C., 1974) p. 117.
J.E. Burke and A.M. Turkalo, Trans. Metall. Soc. AIME 194 (1952) 650.
A. J. Perry, A. R. Nicoll and P. R. Sahm, Brown Boveri, Central Research Laboratory, Heidelberg, Germany (unpublished work).
E. Diderich, J. M. Drapier, D. Coutsouradis and E. Habraken, Cobalt S1 (1975) 6.
W. Epprecht, Z. Metkde. 59 (1968) 1.
D.L. Davidson, U.S. Lindholm and L.M. Yeakly, Acta Met. 14 (1966) 703.
U. W. Hildebrandt, A. R. Nicoll and P. R. Sahm, Brown Boveri, Central Research Laboratory, Heidelberg, Germany (unpublished work).
E.R. Thompson, D.A. Koss and J.C. Chestnutt, Met. Trans., 1 (1970) 2807.
D.A. Koss and S.M. Copley, ibid 2 (1971) 1557.
P.R. Sahm, M. Lorenz, W. Hugi and V. Frühauf, ibid 3 (1972) 1022.
K. Fritscher and H. Mangers, Report DFVLR No. IB 012-72/20, Porz-Wahn, Germany (1973).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hildebrandt, U.W., Sahm, P.R. Thermal cyclic loading in a Co-Cr-Al-C eutectic composite. J Mater Sci 13, 1031–1037 (1978). https://doi.org/10.1007/BF00544698
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00544698