Abstract
The grain size dependence of the fracture toughness (K IC) of an aged Al-6.0% Zn-2.5% Mg alloy was studied experimentally. K IC depended strongly upon grain size (L G) in two ways. In the small grain size region K IC decreased with increasing average grain size. In contrast, K IC increased with increasing average grain size for large grain sizes. The increase in K IC with increasing grain size arose as a result of the presence of abnormally large grains compared to the average grain size in the large-grained specimens.
Similar content being viewed by others
References
E. O. Hall, Proc. Phys. Soc. B64 (1951) 747.
N. J. Petch, J. Iron and Steel Inst. 174 (1953) 25.
Idem, Phil. Mag. 3 (1958) 1089.
R. Armstrong, I. Codd, R. M. Douthwaite and N. J. Petch, ibid 7 (1962) 45.
E. Hornbogen, Z. Metallkde. 66 (1975) 511.
G. Oates, J. Iron and Steel Inst. 205 (1967) 41.
S. Kanazawa, K. Minami, S. Suzuki and T. Kon-No, Tetsu to Hagane 54 (1968) S709.
D. Webster, Trans. ASM 62 (1969) 759.
K. Okabayashi, N. Tomita and S. Kamitani, Tetsu to Hagane 58 (1972) S492.
Y. Kawabe, M. Kanao, K. Nakazawa, and S. Muneki, ibid 60 (1974) 269.
G. T. Hahn and A. R. Rosenfield, “Applications Related Phenomena in Titanium Alloys”, ASTM
D. S. Thompson, R. E. Zinkham, C. W. Price and A. R. Rosenfield, Technical Report AFML-TR-74-129.
P. N. T. Unwin and G. C. Smith, J. Inst. Metals 97 (1969) 299.
T. Kawabata and O. Izumi, J. Mater. Sci. 11 (1976) 892.
Idem, Acta Met. 24 (1976) 817.
A. H. Geisler, “Phase Transformations in Solids”, edited by R. Smoluchowski, J. E. Mayer and W. A. Weyl (Wiley, New York, 1951) p. 387.
N. Ryum, Acta Met. 16 (1968) 327.
T. Kawabata and O. Izumi, ibid 25 (1977) 505.
T. R. Wilshaw and P. L. Platt, “Proceedings of the First International Conference on Fracture”, Vol. 2, edited by T. Yokobori, T. Kawasaki and J. L. Swedlow (The Japanese Society for Strength and Fracture of Materials, Japan, 1966) p. 973.
J. F. Knott and A. H. Cottrell, J. Iron and Steel Inst. 201 (1963) 249.
C. N. Freed and J. M. Krafft, J. Mater. 1 (1966) 770.
T. Kawabata, D.Eng. Thesis, Tohoku University, Sendai (1974).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kawabata, T., Izumi, O. The grain size dependence of fracture toughness in an Al-6.0% Zn-2.5% Mg alloy. J Mater Sci 13, 945–950 (1978). https://doi.org/10.1007/BF00544689
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00544689