Journal of Materials Science

, Volume 27, Issue 2, pp 441–447 | Cite as

Joining of zirconia using zirconium-based alloys

  • Nobuya Iwamoto
  • Hajime Yokoo
Papers

Abstract

The contact angles of Zr-Ni, Zr-Cu and Zr-Co alloys against PSZ were measured by the sessile drop method. Each alloy wetted PSZ very well. Zr-Co alloys showed a different behaviour. Joints of PSZ plates were obtained using Zr-17Ni alloy. At the joint interface, internal oxidation of zirconium occurred. The fracture shear strength of this joint was 55 MPa.

Keywords

Oxidation Polymer Zirconia Contact Angle Shear Strength 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. V. Allen, W. E. Borbidge and P. T. Whelan, “Advances in Ceramics”, Vol. 12, edited by N. Claussen, M. Rühle and A. Heuer (The American Ceramic Society, Columbus, OH, 1984) 537.Google Scholar
  2. 2.
    H. J. de Bruin and H. V. Poorten, Silicate Ind. 46 (1981) 201.Google Scholar
  3. 3.
    F. P. Bailey, in “Energy and Ceramics”, edited by P. Vincenzini (Elsevier Scientific, New York, 1980) p. 1280.Google Scholar
  4. 4.
    N. Iwamoto, Y. Makino and T. Sera, Ceram. Engng Sci. Proc. 10 (1989) 1745.Google Scholar
  5. 5.
    T. Yamane, Y. Minamino, K. Hirano and H. Ohnishi, J. Mater. Sci. 21 (1986) 4227.Google Scholar
  6. 6.
    N. Iwamoto and H. Yokoo, in “Proceedings of the MRS International Meeting on Advanced Materials”, Vol. 8, edited by N. Iwamoto and T. Suga (Materials Research Society, Pittsburgh, Pennsylvania, 1989) p. 85.Google Scholar
  7. 7.
    N. Iwamoto, Y. Makino and H. Yokoo, Ceram. Engng Sci. Proc. 10 (1989) 1722.Google Scholar
  8. 8.
    T. Narita, T. Mitsueda and T. Ishikawa, J. Japan Inst. Metals, 54 (1990) 321.Google Scholar
  9. 9.
    W. O. Kingery, “Property Measurements at High Temperatures” (Wiley, New York, 1959).Google Scholar
  10. 10.
    F. Bashforth and J. C. Adams, “An Attempt to Test the Theories of Capillary Action” (Cambridge University Press, London, 1983).Google Scholar
  11. 11.
    J. N. Butler and B. H. Bloom, Surface Sci. 4 (1966) 1.Google Scholar
  12. 12.
    M. Ueki, M. Naka and I. Okamoto, J. Mater. Sci. Lett. 5 (1986) 1261.Google Scholar
  13. 13.
    M. Humenik and N. M. Parikh, J. Amer. Ceram. Soc. 39 (1956) 60.Google Scholar

Copyright information

© Chapman & Hall 1992

Authors and Affiliations

  • Nobuya Iwamoto
    • 1
  • Hajime Yokoo
    • 2
  1. 1.Welding Research InstituteOsaka UniversityOsakaJapan
  2. 2.Advanced Materials Research LaboratoryOsaka Cement Co. LtdOsakaJapan

Personalised recommendations