Advertisement

Journal of Materials Science

, Volume 27, Issue 6, pp 1505–1513 | Cite as

Stress relaxation in bending of type AISI304 stainless steel at 773 and 823 K

  • F. Povolo
  • R. J. Tinivella
  • J. F. Reggiardo
  • G. B. Botteri
Papers

Abstract

Stress relaxation measurements at 773 and 823 K in bending and for different initial stresses in type AISI 304 stainless steel are reported. Several thermal treatments were given to the specimens prior to the relaxation testing. The data are fitted to a general equation that describes thermally activated dislocation motion and it is shown that, in some cases, the internal stress changes with the applied stress. No substantial differences were found in the stress relaxation behaviour on changing the thermal treatment. This is attributed to the influence of dynamic strain ageing; an equation which can be used to describe experimental log stress against log strain rate curves is presented.

Keywords

Stress Relaxation Stress Change Relaxation Behaviour Strain Ageing Dynamic Strain 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J. N. Conway, R. H. Stentz and J. T. Berling, “Fatigue, Tensile and Relaxation Behaviour of Stainless Steels”, US Atomic Energy Commission Report TID-26135 (1975).Google Scholar
  2. 2.
    R. W. Rhode and J. C. Swearengen, in Transactions of the Fourth International Conference on Structural Mechanics in Reactor Technology, Vol. L edited by A. Jaeger and B. A. Boley (North-Holland, Amsterdam, 1977) p. 85.Google Scholar
  3. 3.
    J. B. Conway, “An Analysis of the Relaxation Behaviour of AISI 304 and 316 Stainless Steel at Elevated Temperature”, US Atomic Energy Commission Report GEMP-730 (General Electric Company, 1969).Google Scholar
  4. 4.
    E. W. Hart, Trans. J. Engng Mater. Tech. 98 (1976) 193.Google Scholar
  5. 5.
    E. W. Hart, in Transactions of the Fourth International Conference on Structural Mechanics in Reactor Technology, Vol L, edited by A. Jaeger and B. A. Boley (North-Holland, Amsterdam, 1977) p. 1/1.Google Scholar
  6. 6.
    H. Yamada and Che-Yu Li, Metall. Trans. 4 (1973) 2133.Google Scholar
  7. 7.
    J. F. Thomas Jr. and F. L. Yaggee, ibid. 6A (1975) 1835.Google Scholar
  8. 8.
    G. L. Wire, F. V. Ellis and Che-Yu Li, Acta Metall 24 (1976) 677.Google Scholar
  9. 9.
    Che-Yu Li, F. V. Ellis and F. H. Huang, in “Alloys and Microstructural Design”, edited by J. K. Tien and G. S. Ansell (Academic, New York, 1976) p. 403.Google Scholar
  10. 10.
    N. Nir, F. H. Huang, E. W. Hart and Che-Yu Li, Metall. Trans. 8A (1977) 583.Google Scholar
  11. 11.
    F. H. Huang, F, V. Ellis and Che-Yu Li, ibid. 8A (1977) 699.Google Scholar
  12. 12.
    H. Yamada, Scripta Metall. 11 (1977) 321.Google Scholar
  13. 13.
    F. H. Huang, H. Yamada and Che-Yu Li, in Proceedings of the Fifth International Conference on Materials Technology, Sao Paulo (1978) p. 83.Google Scholar
  14. 14.
    M. J. Anciaux, Metall. Trans. 12A (1981) 1981.Google Scholar
  15. 15.
    F. Povolo and R. J. Tinivella, J. Mater. Sci. 19 (1984) 2373.Google Scholar
  16. 16.
    Idem, ibid. 19 (1984) 1851.Google Scholar
  17. 17.
    D. E. Fraser, P. A. Ross-Ross and A. R. Causey, J. Nucl. Mater. 46 (1973) 281.Google Scholar
  18. 18.
    F. Povolo and E. H. Toscano, ibid. 74 (1978) 76.Google Scholar
  19. 19.
    Idem, ibid. 78 (1978) 217.Google Scholar
  20. 20.
    L. D. Blackburn, in “The Generation of Isochronous Stress Strain Curves”, Proceedings of the ASME Winter Annual Meeting, New York, November, 1972 (ASME, New York).Google Scholar
  21. 21.
    F. Povolo and J. F. Reggiardo, J. Mater. Sci. 23 (1988) 241.Google Scholar
  22. 22.
    W. G. Johnston and J. J. Gilman, J. Appl. Phys. 30 (1959) 139.Google Scholar
  23. 23.
    F. Povolo and G. H. Rubiolo, Phil Mag. A56 (1987) 209.Google Scholar

Copyright information

© Chapman & Hall 1992

Authors and Affiliations

  • F. Povolo
    • 1
  • R. J. Tinivella
    • 2
  • J. F. Reggiardo
    • 2
  • G. B. Botteri
    • 2
  1. 1.International Centre for Theoretical PhysicsTriesteItaly
  2. 2.Facultad Regional San NicolasUniversidad Tecnologica NacionalSan NicolasArgentina

Personalised recommendations