Abstract
The effect of particle size ratios on tensile strength, tensile modulus, impact strength, Vickers hardness and transverse rupture strength of particulate PVC-Cu composite has been studied. The strength values reach a maximum at a particular metal loading where the formation of a segregated network is believed to occur. This critical metal loading shifts towards lower values with increasing polymer-to-metal size ratios. The mean free path calculated from the proposed model is found to be same in all metal loadings, corresponding to strength maxima irrespective of the particle size ratios. A correlation between strength properties and the mean free path has been suggested.
Similar content being viewed by others
References
L. E. Nielsen, “Mechanical Properties of Polymers and Composites” Vol. 2 (Marcel Dekker, Inc. New York, 1974).
E. H. Kerner, Proc. Phys. Soc. B69 (1956) 808.
Z. Hashin and S. Shtrikman, J. Mech. Phys. Solids 11 (1963) 127.
Z. Hojo, W. Toyoshima, M. Tamura and N. Kawamvra, Polymer Eng. Sci. 14 (1974) 604.
H. Alter, J. Appl. Polymer Sci. 9 (1966) 1525.
W. M. Baldwin, Acta Met. 6 (1958) 141.
G. Landon, G. Lewis and G. F. Boden, J. Mater. Sci. 12 (1977) 1605.
G. W. Brassell and K. B. Wischmann, ibid. 9 (1974) 307.
A. Malliaris and D. T. Turner, J. Appl. Phys. 42 (1971) 614.
R. P. Kusy and D. T. Turner, SPE J. 29 (1973) 56
R. Mukhopadhyay, S. K. De and S. Basu, J. Appl. Polymer Sci. 20 (1976) 2575.
“Mechanical Properties of Polymers”, Encyclopedia Reprints, edited by N. M. Bikales (Wiley Interscience, New York, 1971).
S. K. Bhattacharyya, S. Basu and S. K. De, Composites (accepted for publication).
J. Gurland and P. Bardzil, J. Metals (1955) 311.
L. J. Broutman and R. H. Krock, “Modern Composite Materials” (Addison-Wesley Publishing Company, 1967).
H. Krock and L. Shephard, Trans. AIME 227 (1963) 1127.
“Plasticisers, Stabilisers and Fillers”, edited by P. D. Ritchie (London Iliffe Books Ltd, 1972).
B. S. Kolupaev and B. P. Demyanyuk, Plast. Massy. 5 (1974) 43.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bhattacharyya, S.K., Basu, S. & De, S.K. Effect of particle size on the mechanical properties of poly(vinylchloride)-copper particulate composite. J Mater Sci 13, 2109–2118 (1978). https://doi.org/10.1007/BF00541664
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00541664