Journal of Materials Science

, Volume 12, Issue 7, pp 1463–1471 | Cite as

The mechanical properties of Fe-Co heterogeneous alloys fabricated by powder metallurgy techniques

  • Morihiko Nakamura
  • Kazuo Tsuya
Papers

Abstract

Fe-Co heterogeneous alloys fabricated by powder metallurgy techniques were hot rolled, cold rolled and then heat treated. These processes produced a type of fibre-reinforced composite which consisted of fibrous Fe and Fe-Co phases. The tensile strength of the alloys depended on the composition and degree of order of the Fe-Co phase. The rule of mixtures was applicable, provided that the dependence of strength in the Fe-Co phase on Co content was considered.

Keywords

Polymer Mechanical Property Tensile Strength Powder Metallurgy Powder Metallurgy Technique 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    S. Yano, H. Sakurai, H. Mimura, N. Wakita, T. Ozawa and K. Aoki, Tetsu-to-hagane 59 (1973) 752 (in Japanese).Google Scholar
  2. 2.
    J. D. Embury and R. M. Fisher, Acta. Met. 14 (1966) 147.Google Scholar
  3. 3.
    Y. Tomota, K. Kuroki, T. Mori and I. Tamura, Mater. Sci. Eng. 24 (1976) 85.Google Scholar
  4. 4.
    R. M. Anderson and P. D. Caton, J. Inst. Metals 96 (1968) 108.Google Scholar
  5. 5.
    G. Wassermann, Z. Metallkde. 64 (1973) 844.Google Scholar
  6. 6.
    H. P. Wahl and G. Wassermann, ibid 61 (1970) 326.Google Scholar
  7. 7.
    Y. Umakoshi, M. Yamaguchi, S. Kitano and T. Yamane, Trans. Japan Inst. Met. 14 (1973) 224.Google Scholar
  8. 8.
    M. Yamaguchi, Y. Umakoshi, T. Kondo and G. Mima, MeT. Trans, 2 (1971) 1293.Google Scholar
  9. 9.
    S. Floreen, H. W. Hayden and R. M. Pilliar, Trans. Met. Soc. AIME 245 (1969) 2529.Google Scholar
  10. 10.
    R. Neuss and G. Wassermann, Z. Metallkde. 64 (1973) 696.Google Scholar
  11. 11.
    K. H. Reiff, Metall. 28 (1974) 686.Google Scholar
  12. 12.
    D. W. Clegg and R. A. Buckley, Met. Sci. J. 7 (1973) 48.Google Scholar
  13. 13.
    N. S. Stoloff, “Strengthening Methods in Crystals” (Elsevier, New York, 1971) p. 193.Google Scholar
  14. 14.
    M. J. Marcinkowski and H. Chessin, Phil. Mag. 10 (1964), 837.Google Scholar
  15. 15.
    M. F. Ashby, ibid 21 (1970) 399.Google Scholar

Copyright information

© Chapman and Hall Ltd. 1977

Authors and Affiliations

  • Morihiko Nakamura
    • 1
  • Kazuo Tsuya
    • 1
  1. 1.National Research Institute for MetalsTokyoJapan

Personalised recommendations