Abstract
Several carbon products such as carbon brushes, special nuclear carbons, seal rings, etc. require carbon black in the filler composition. In the present study, the raw carbon black was mixed with a coal tar pitch and the resulting carbon mix was shaped, calcined and finally crushed into a fine powder for its subsequent use. The influence of this modified (processed) carbon black in the filler composition on the characteristics of the final calcined petroleum coke, processed carbon black and coal tar pitch-based carbon mixes has been investigated.
Similar content being viewed by others
References
L. M. Ligget, in “Kirk-Othmer Encyclopedia of Chemical Technology” Vol. 4 (Wiley Interscience, New York, 1964) p. 158.
E. I. Shobert II, in “Modern Materials” Vol. 4, edited by B. W. Gonser and H. H. Hausner (Academic Press. New York and London, 1964) p. 1.
C. L. Mantell, “Carbon and Graphite Handbook” (Wiley Interscience, New York, 1968).
J. M. Hutcheon, in “Modern Aspects of Graphite Technology” edited by L. C. F. Blackman (Academic Press, New York and London, 1970) p. 49.
A. S. Fialkov, “Industrial Carbon and Graphite” (Society of Chemical Industry, London, 1958) p. 101.
L. Girolami, Fuel 42 (1963) 229.
D. J. Bradford, E, Greenhalgh, R. Kingshott, A. Senior and P. A. Bailey, Proceedings of the 3rd Conference on Industrial Carbon and Graphite (Society of Chemical Industry, London, 1971) p. 520.
J. M. Williams and R. J. Imprescia, Carbon 13 (1975) 82.
S. S. Jones and R. D. Hildebrandt, in “Light Metals” Vol. 1 (The Metallurgical Society of AIME, New York, 1975) p. 291.
R. K. Aggarwal and G. Bhatia, J. Mater. Sci. 13 (1978) 1632.
D. R. Ball, Carbon 16 (1978) 205.
G. R. Romovacek, ibid. 17 (1979) 307.
G. W. Morelli and J. F. Rakszawski, Extended Abstracts-13th Biennial Conference on Carbon July, 1977 (ACS, 1977) p. 189.
G. Bhatia, R. K. Aggarwal and P. Ranjan, J. Mater. Sci. 12 (1977) 1639.
G. Bhatia and R. K. Aggarwal, J. Mater. Sci. 14 (1979) 1103.
Idem, unpublished work.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bhatia, G., Aggarwal, R.K. Influence of processed carbon black in the filler composition on the characteristics of baked carbon mixes. J Mater Sci 16, 1757–1762 (1981). https://doi.org/10.1007/BF00540621
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00540621