Übersicht
Die Ausbreitung plastischer Wellen in einem Stabwerk wird mit Hilfe eines einfachen „bilinearen” Werkstoffmodells theoretisch untersucht und mit experimentellen Werten verglichen. Es zeigt sich, daß bis zum ersten vollen Durchlauf der plastischen Schockfronten die dynamische Beanspruchung sehr gut beschrieben wird. Die danach reflektierten plastischen Wellen lassen sich zwar nicht mehr im Detail erfassen, da ihr Schockcharakter verloren geht. Doch erhält man auch dann noch eine recht gute Näherung für die bleibenden Formänderungen. Ferner wird die für praktische Anwendungen erhebliche Vereinfachung gerechtfertigt, daß die Stabmassen in den Knoten zusammengefaßt werden dürfen.
Summary
The propagation of plastic waves in pin-jointed trusses is investigated theoretically with the aid of a simple bilinear constitutive law. The results of the analysis are compared with experimental results and good agreement is found. In addition, it is shown that the masses of the bars can be considered to be concentrated in the joints which leads to a considerable simplification of the analysis.
Literatur
Cristescu, N.: Dynamic Plasticity. Amsterdam 1967
Vault de, G. P.: The Effect of Lateral Inertia on the Propagation of Plastic Strain in a Cylindrical Rod. J. Mech. Phys. Solids 13 (1965) S. 55
Behrens, A.: Ein Beitrag zur Theorie des Hochgeschwindigkeitsschmiedens. Diss. TU Braunschweig 1968
Lippmann, H.: Plastokinetics of Metal Forming. (In: Topics of Applied Continuum Mechanics. Hrsg.: Zeman, J. L. und Ziegler, F.). Wien 1974
Hauger, W.; Lippmann, H.; Kullmann, G.; Mannl, V.: Elastisch-plastische Wellen in Stabwerken. Institut für Technische Mechanik und Festigkeitslehre, Universität Karlsruhe, DFG-Zwischenbericht 1975
Burgmann, J. B.; Rawlings, B.: Dynamic Plastic Analysis of Pin-Jointed Frames. Int. J. Mech. Sci. 10 (1968) S. 967
Boley, B. A.; Chao, Ch. Ch.: Impact on Pin-Jointed Trusses. Trans. Am. Soc. Civ. Eng. (1957) S. 39
Lee, E. H.; Wolfe, H.: Plastic Wave Propagation Effects in High-Speed Testing. Trans. ASME J. Appl. Mech. 18 (1951) S. 379
Author information
Authors and Affiliations
Additional information
Herrn Prof. Dr.-Ing. Dr. rer. nat. h. c. H. Neuber zum 70. Geburtstag gewidmet.
Rights and permissions
About this article
Cite this article
Hauger, W., Kulimann, G., Lippmann, H. et al. Plastische Wellen in Stabwerken. Ing. arch 45, 291–306 (1976). https://doi.org/10.1007/BF00535516
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00535516