Abstract
The melting point of 99.95+% pure palladium was measured by means of a subsecond duration pulse heating technique. The average temperature at the melting point for three specimens was 1827 K with an average absolute deviation from the mean of 0.1 K. The total error in temperature is estimated to be not more than ±4 K.
Similar content being viewed by others
References
The International Committee for Weights and Measures, Metrologia 5:35 (1969).
L. Crovini, R. E. Bedford, and A. Moser, Metrologia 13:197 (1977).
A. Cezairliyan, J. Res. Natl. Bur. Stand. (U.S.A.) 75C:7 (1971).
A. Cezairliyan, M. S. Morse, H. A. Berman, and C. W. Beckett, J. Res. Natl. Bur. Stand. (U.S.A.) 74A:65 (1970).
C. O. Fairchild, W. H. Hoover, and M. F. Peters, J. Res. Natl. Bur. Stand. (U.S.A.) 2:931 (1929).
F. H. Schofield, Proc. Roy. Soc. (London) A125:517 (1929).
F. H. Schofield, Proc. Roy. Soc. (London) A155:301 (1936).
G. M. Foley, Rev. Sci. Instrum. 41:827 (1970).
J. C. DeVos, Physica 20:669 (1954).
A. P. Miiller and A. Cezairliyan, High Temp. Sci. 11:41 (1979).
H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids (Oxford University Press, Oxford, 1959).
W. Nernst and H. V. Wartenberg, Verh. d. Dtsch. Phys. Ges. 8:48 (1906).
C. W. Waidner and G. K. Burgess, Bull. Bur. Stand. (U.S.A.) 3:163 (1907).
A. L. Day and R. B. Sosman, Am. J. Sci. 29:93 (1910).
F. Hoffman and W. Meissner, Ann. d. Phys. 60:201 (1919).
C. W. Waidner, E. F. Mueller, and P. D. Foote, Bull. A.I.M.M.E. No. 153, 2051 (1919).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Miiller, A.P., Cezairliyan, A. The melting point of palladium by a pulse heating method. Int J Thermophys 2, 63–70 (1981). https://doi.org/10.1007/BF00503575
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00503575