Advertisement

International Journal of Thermophysics

, Volume 5, Issue 1, pp 91–110 | Cite as

Reference materials and evaluation of thermophysical properties data

  • K. Iizuka
  • A. Ono
  • K. Yoshida
Article
  • 50 Downloads

Abstract

This paper presents a general review of the governmental activities in Japan on reference materials and evaluation of thermophysical properties data and then describes recent developments at the National Research Laboratory of Metrology (NRLM) in the field of thermophysical properties and related standards. As for reference materials, the past and present activities organized by the government and a few related associations are reviewed from the point of view of establishing traceability systems, whereas, on the evaluation of thermophysical properties, the framework of collaborative research for establishing data base systems by network sharing is mentioned. Then the recent studies of NRLM on the measurements and standards of thermophysical properties as well as its calibration services are summarized.

Key words

data evaluation measurement techniques reference materials standards thermophysical properties data 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    G. A. Uriano, ISO/REMCO 93 (1983).Google Scholar
  2. 2.
    S. Fujisawa et al., Joho Kanri (Journal of Information Processing and Management) 25:840 (1983). Ibid. 25:929 (1983), in Japanese.Google Scholar
  3. 3.
    O. Tamura and H. Sakurai, Jpn. J. Appl. Phys. 22:L356 (1983).Google Scholar
  4. 4.
    F. Pavese, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 209–215.Google Scholar
  5. 5.
    S. Sawada, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 343–346.Google Scholar
  6. 6.
    H. Itoh, Trans. Soc. Instrum. Control Engrs. 19:978 (1983), in Japanese.Google Scholar
  7. 7.
    H. Sakurai, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 39–42.Google Scholar
  8. 8.
    F. Sakuma and S. Hattori, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 421–427.Google Scholar
  9. 9.
    F. Sakuma and S. Hattori, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 535–539.Google Scholar
  10. 10.
    A. Ooiwa, in Proc. 1st Symp. Fluid Metrol. (Society of Instrument and Control Engineers, Japan, 1983), pp. 9–12 (in Japanese).Google Scholar
  11. 11.
    K. Nishibata, S. Yamamoto, and R. Kaneda, Jpn. J. Appl. Phys. 19:2245 (1980).Google Scholar
  12. 12.
    S. Yamamoto, in Proc. 22nd High Press. Conf. Japan (1981), pp. 94–95 (in Japanese).Google Scholar
  13. 13.
    S. Seino, Jpn. J. Appl. Phys. 20:2351 (1981).Google Scholar
  14. 14.
    K. Iizuka and M. Goto, Ann. CIRP 30:451 (1981).Google Scholar
  15. 15.
    R. Masui, H. Watanabe, and K. Iizuka, Jpn. J. Appl. Phys. 17:755 (1978).Google Scholar
  16. 16.
    H. Watanabe and K. Iizuka, Jpn. J. Appl. Phys. 20:1979 (1981).Google Scholar
  17. 17.
    S. Yamamoto, in Proc. 24th High Press. Conf. Japan (1983), pp. 38–39 (in Japanese).Google Scholar
  18. 18.
    H. Watanabe and K. Iizuka, in Proc. 8th Symp. Thermophys. Properties, Vol. II, J. V. Sengers, ed. (ASME, New York, 1982), pp. 319–323.Google Scholar
  19. 19.
    M. Okaji, H. Imai, N. Hida, and K. Iizuka, Proc. 8th Thermal Expansion Symp., Gaithersburg, Md. (June 1981).Google Scholar
  20. 20.
    M. Okaji, H. Imai, N. Hida, and K. Iizuka, in Proc. 2nd Japan Symp. Thermophys. Properties (Japan Society of Thermophysical Properties, Sapporo, 1981), pp. 35–38.Google Scholar
  21. 21.
    M. Okaji and H. Imai, J. Phys. E 16:1208 (1983).Google Scholar
  22. 22.
    H. Watanabe, in Proc. 3rd Japan Symp. Thermophys. Properties (Japan Society of Thermophysical Properties, Hamamatsu, 1982), pp. 5–8 (in Japanese).Google Scholar
  23. 23.
    T. Nashima and K. Yoshida, Proc. 1st Japan Symp. Thermophys. Properties (Japan Society of Thermophysical Properties, Tokyo, 1980), pp. 63–66.Google Scholar
  24. 24.
    K. Yoshida, Y. Kurano, and M. Kawata, Rheology, Vol. 2 (Fluid) (Plenum, New York, 1980), pp. 211–216.Google Scholar
  25. 25.
    A. Ooiwa, in Proc. 41st Autumn Meeting, Japan Soc. Appl. Phys. (1980), p. 31 (in Japanese).Google Scholar
  26. 26.
    Y. Kurano and K. Yoshida, in Proc. 29th Joint Meeting Appl. Phys. (1982), p. 50 (in Japanese).Google Scholar
  27. 27.
    Y. Kurano and K. Yoshida, in Proc. 23rd High Press. Conf. Japan (1982), pp. 204–205 (in Japanese).Google Scholar
  28. 28.
    K. Nishibata, S. Yamamoto, and N. Hida, in Proc. 22nd High Press. Conf. Japan (1981), pp. 164–165 (in Japanese).Google Scholar
  29. 29.
    S. Hattori, Trans. Soc. Instrum. Control Engrs. 15:774 (1979), in Japanese.Google Scholar
  30. 30.
    T. Baba and A. Ono, in Proc. 22nd Annu. Meeting Soc. Instrum. Control Engrs. (Kita-Kyushu, 1983), pp. 713–714, in Japanese.Google Scholar
  31. 31.
    A. Ono, in Proc. 8th Symp. Thermophys. Properties, Vol. II, J. V. Sengers, ed. (ASME, New York, 1982), pp. 133–137.Google Scholar
  32. 32.
    Y. Ohwada, J. Opt. Soc. Am. 71:106 (1981).Google Scholar
  33. 33.
    Y. Ohwada, Appl. Opt. 20:3332 (1981).Google Scholar
  34. 34.
    Y. Ohwada, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 517–519.Google Scholar
  35. 35.
    A. Ono, J. Opt. Soc. Am. 70:547 (1980).Google Scholar
  36. 36.
    A. Ono, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 513–516.Google Scholar
  37. 37.
    A. Ono, R. M. Trusty, and D. P. DeWitt, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 541–550.Google Scholar
  38. 38.
    S. Hattori and A. Ono, in Temperature, Its Measurement and Control in Science and Industry, Vol. 5, Part 1, J. F. Schooley, ed. (American Institute of Physics, New York, 1982), pp. 521–528.Google Scholar
  39. 39.
    T. Arai, Trans. Soc. Instrum. Control Engrs. 15:678 (1979), in Japanese.Google Scholar
  40. 40.
    T. Arai and A. Ono, ref. 30, pp. 193–194.Google Scholar
  41. 41.
    Y. Hanada and H. Inanaga, in Proc. 21st Annu. Meeting Soc. Instrum. Control Engrs. (Tokyo, 1982), pp. 209–210 (in Japanese).Google Scholar
  42. 42.
    T. Baba, N. Takiya, and S. Hattori, ref. 30, pp. 715–716.Google Scholar
  43. 43.
    K. Iizuka and M. Goto, Bull. NRLM, series no. 31 (1975), p. 35.Google Scholar
  44. 44.
    Tables Alcoométriques Internationales, O.I.M.L. (1973).Google Scholar

Copyright information

© Plenum Publishing Corporation 1984

Authors and Affiliations

  • K. Iizuka
    • 1
  • A. Ono
    • 1
  • K. Yoshida
    • 1
  1. 1.National Research Laboratory of MetrologyIbarakiJapan

Personalised recommendations