Abstract
A microsecond-resolution capacitor discharge technique is used to heat niobium specimens rapidly to temperatures several hundred degrees above the melting point. From the measurements of current, voltage, and temperature as a function of time, the heat capacity and electrical resistivity of liquid niobium in the range 2850 to 3200 K were determined. Maximum uncertainties in the results are estimated to be ±5% for heat capacity and ±3% for electrical resistivity.
Similar content being viewed by others
References
A. Cezairliyan and J. L. McClure, Int. J. Thermophys. 8:577 (1987).
G. M. Foley, M. S. Morse, and A. Cezairliyan, in Temperature: Its Measurement and Control in Science and Industry, Vol. 5, J. F. Schooley, ed. (Am. Inst. Phys., New York, 1982), p. 447.
A. Cezairliyan, High Temp. High Press. 4:453 (1972).
D. W. Bonnell, Property Measurement at High Temperatures-Levitation Calorimetry Studies of Liquid Metals, Ph.D. thesis (Rice University, Houston, Tex., 1972).
G. Betz and M. G. Frohberg, Z. Metallkde. 71:451 (1980).
R. Gallob, H. Jäger, and G. Pottlacher, High Temp. High Press. 17:207 (1985).
J. W. Shaner, G. R. Gathers, and W. M. Hogson, in Proceedings of the Seventh Symposium on Thermophysical Properties, A. Cezairliyan, ed. (ASME, New York, 1977) p. 896.
G. I. Mozharov and A. I. Savvatimskii, High Temp. (USSR) 19:691 (1981).
A. Cezairliyan, J. Res. Natl. Bur. Stand. (U.S.) 75A:565 (1971).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cezairliyan, A., McClure, J.L. Heat capacity and electrical resistivity of liquid niobium near its melting temperature. Int J Thermophys 8, 803–808 (1987). https://doi.org/10.1007/BF00500796
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00500796