Summary
Metal-polymer bonds are very important in industrial manufacturing. In order to optimize the adhesive strength and durability of these bonds analytical investigations are necessary in the bondline containing the metal surface, the metal oxide, the polymer zone near the oxide surface and the polymer bulk material. This area has an extension of only some nm to a few μm, depending on the base material and its surface pretreatment. Analytical investigations in these dimensions require a highly sophisticated equipment.
Zusammenfassung
Metall-Polymer-Verbunde sind in der industriellen Fertigung von hohem Interesse. Zur Optimierung der adhäsiven Festigkeit und Langzeitbeständigkeit sind eingehende Untersuchungen dieser Verbunde, bestehend aus der Metalloberfläche, dem Metalloxid, der Polymerzone nahe der Oxidoberfläche und dem Polymer, erforderlich. Diese Zone hat insgesamt eine Ausdehnung von nur wenigen μ-Metern, abhängig vom Grundwerkstoff und dessen Oberflächenvorbehandlung. Entsprechend aufwendig gestalten sich analytische Untersuchungen in diesen Dimensionen.
Similar content being viewed by others
Literatur
Hennemann OD (1979) Oberfläche, Surface 20, Heft 12, S 288; (1980) 21:Heftl, S2
Brockmann W, Hennemann OD (1982) Int Adhesion Adhesives 33–40
Hennemann OD (1980) Adhäsion 1:18
Hennemann OD, Brockmann W (1982) Weak bondary zones in metal bonds. 14th Nat. SAMPE Conf. in Material and Process Advances. SAMPE, vol 14, Azusa 1982, S 302–310
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hennemann, O.D., Schäfer, H. Forderungen an die Analytik von Klebverbunden. Z. Anal. Chem. 325, 281–284 (1986). https://doi.org/10.1007/BF00498174
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00498174