Abstract
ZrO2 coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC3H7)4 as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm3 of ZrO2. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 μm. The influence of the ZrO2 coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.
Similar content being viewed by others
References
C.J. Brinker and G.W. Scherer, Sol-Gel Science: the Physics and Chemistry of Sol-Gel Processing (Academic Press, San Diego, 1990).
M.A. Aegerter, M. Jafelicci Jr., D.F. Souza and E.D. Zanotto, ed., Sol-Gel Science and Technology (World Scientific, Singapore, 1991).
H. Dislich, in Sol-Gel Technology for Thin Films, Preforms, Electronics, and Specialty Shapes, edited by L.C. Klein (Noyes Publications, Park Ridge, 1988), p. 50.
R.B. Pettit, C.S. Ashley, S.T. Reed, and C.J. Brinker, in Sol-Gel Technology for Thin Films, Preforms, Electronics, and Specialty, edited by L.C. Klein (Noyes Publications, Park Ridge, 1988), p. 80.
S. Sakka, Reference 2, p. 346.
H. Schmidt, in Chemistry, Spectroscopy and Applications of Sol-Gel Glasses, edited by R. Reisfeld and C.K. Jorgensen (Springer-Verlag, Berlin, 1992), p. 119.
S. Sakka and T. Yoko, in Chemistry, Spectroscopy and Applications of Sol-Gel Glasses, edited by R. Reisfled and C.K. Jorgensen (Springer-Verlag, Berlin, 1992), p. 90.
T. Yoko, K. Kamiya, A. Yuasa, K. Tanaka, and S. Sakka, J. Non-Cryst. Solids 100, 483 (1988).
T. Yoko, A. Yuasa, K. Kamiya, and S. Sakka, J. Electrochem. Soc. 138 8, (1991).
T. Yoko, A. Yuasa, K. Kamiya, K. Tanaka, and S. Sakka, Res. Rep. Fac. Eng. Mie Univ. 12, 41 (1987).
T. Yoko, K. Kamiya, K. Tanaka, and S. Sakka, Res. Rep. Bull. Chem. Res. Kyoto Univ. 67, 249 (1990).
T. Yoko, Y. Inagaki, and S. Sakka, Rep. Asahi Glass Foundation Ind. Techn. 13, 56 (1990).
J.D. Cairns, D.L. Segal, and J.L. Woodhead, Mat. Res. Soc. Symp. 32, 135 (1984).
G. Carturan, G. Facchin, G. Navaziv, V. Gottardi, and G. Cocco, in Ultrastructure Processing of Ceramics, Glasses and Composites, edited by L.L. Hench and D.R. Ulrich (J. Wiley, New York, 1984), p. 197.
A. Ueno, H. Suzuki, and Y. Kotera, J. Chem. Soc. Faraday Trans. 179, 127 (1983).
T. Ida, H. Tsuihi, A. Ueno, K. Tohki, Y. Udaga, K. Imai, and T. Sano, J. Catal. 106, 428 (1987).
S. Sakka, Catalysts 32, 2 (1990) (in Japanese).
J. Schlichting and S. Neumann, J. Non-Cryst. Solids 48, 185 (1982).
J. Martinsen, R.A. Figat, and M.W. Shafer, Mat. Res. Soc. Symp. Proc. 32, 361 (1984).
R.K. Brow and C.G. Pantano, Mat. Res. Soc. Symp. Proc. 32, 361 (1982).
S. Ogiwara and K. Kinugawa, Yogyo-Kyokai-Shi 90, 157 (1982) (in Japanese).
P.M. Glaser and C.G. Pantano, J. Non-Cryst. Solids 63, 209 (1984).
A. Makishima, H. Kubo, K. Wada, Y. Kitami, and T. Shimohira, J. Am. Ceram. Soc. 69, C127 (1986).
A. Makishima, M. Asami, and K. Wada, J. Non-Cryst. Solids 121, 310 (1990).
W. Beier, A.A. Göktas, and G.H. Frischat, J. Non-Cryst. Solids 100, 531 (1988).
C.W. Hsieh, A.S.T. Chiang, C.C. Lee, and S.J. Yang, J. Non-Cryst. Solids 144, 53 (1992).
S. Reed and C. Ashley, Mat. Res. Soc. Symp. Proc. 121, 631 (1988).
O. de Sanctis, L. Gomez, N. Pelligri, C. Parodi, A. Marajofsky, and A. Duran, J. Non-Cryst. Solids 121, 338 (1990).
N. Tohge, A. Matsuda, and T. Minami, Chem. Express 2, 141 (1987).
M. Guglielmi, D. Festa, P.C. Innocenzi, P. Colombo, and M. Gobain, in Proc. Sixth International Workshop on Glasses and Ceramics from Gels, Seville 1991, J. Non Cryst. Solids 147–148, 474–477 (1992).
A.R. Di Giampaolo, M. Puerta, J. Lira, and N. Ruiz, in Proc. Sixth International Workshop on Glasses and Ceramics from Gels, Seville 1991, J. Non Cryst. Solids 147–148, 467–473 (1992).
M. Atik and M.A. Aegerter, in Proc. Sixth International Workshop on Glasses and Ceramics from Gels, Seville 1991, J. Non-Cryst. Solids 147–148, 813–819 (1992).
M. Atik and J. Zarzycki, J. Mat. Sci. Lett., Accepted for publication.
A. Tomasi, P. Scardi and F. Marchetti, Mat. Res. Soc. Symp. Proc. 271, 477–483 (1992).
M. Atik and M.A. Aegerter, Mat. Res. Soc. Symp. Proc. 271, 471–476 (1992).
D. Ganguli and D. Kundu, J. Mat. Sci. Lett. 3, 503 (1984).
N. Tohge, A. Matsuda, and T. Minami, J. Am. Ceram. Soc. 70, C13 (1987).
K. Izumi, H. Tanaka, Y. Uchida, N. Tohge, and T. Minami, in Proc. Sixth International Workshop on Glasses and Ceramics from Gels, Seville 1991, J. Non Cryst. Solids 147–148, 483–487 (1992).
R. di Maggio, P. Scardi, and A. Tomasi, Mat. Res. Soc. Symp. 180, 481 (1990).
M. Atik and J. Zarzycki (to be published).
A.J. Sedriks, Corrosion of Stainless Steels (John Wiley & Sons, New York, 1979).
H.H. Uhlig and R.W. Revie, Corrosion and Corrosion Control, 3rd. Edition (John Wiley & Sons, New York, 1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
de Lima Neto, P., Atik, M., Avaca, L.A. et al. Sol-gel ZrO2 coatings for chemical protection of stainless steel. Journal of Sol-Gel Science and Technology 1, 177–184 (1994). https://doi.org/10.1007/BF00490247
Issue Date:
DOI: https://doi.org/10.1007/BF00490247