Summary
A new analytical method for the quantitative determination of EDTA in radioactive waste solutions is described. With this method the total amount of EDTA is converted into the CuEDTA complex at pH 10 while an excess of cupric ions is added. The analysis is based on the Chromatographic separation of the complex from the matrix. Several stationary and mobile phases are tested for their suitability. For the identification of EDTA a UV detector operated at 260 nm is used. EDTA contents in the range of 0.5–300 mg·1−1 can be determined with relative standard deviations from 0.3 to 2.5% without preconcentration. It was found that EDTA is not stable in uranium containing solutions. In order to explain this behaviour several experiments have been carried out and the mechanism of the degradation is discussed.
Similar content being viewed by others
References
Bidlingmeyer BA (1980) J Chromatogr Sci 18:525
Scott RPW, Kucera P (1977) J Chromatogr 142:213
Schwarzenbach G, Gut R, Anderegg G (1954) Helv Chim Acta 37:937
Drobnik S et al., personal communication
Overvoll PA, Lund W (1982) Anal Chim Acta 143:153
Sniegoski PJ, Venezky DL (1974) J Chromatogr Sci 12:359
Martell AE, Motekaitis RJ, Fried AR, Wilson JS, MacMillan DT (1975) Can J Chem 53:3471
Stevens TS, Turkelson VT, Albe WR (1977) Anal Chem 49:1176
Bjerrum J, Schwarzenbach G, Sillén LG (1957) Stability constants, part 1. The Chemical Society, London
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Unger, M., Mainka, E. & König, W. Quantitative determination of EDTA and its behaviour in radioactive waste solutions using HPLC. Z. Anal. Chem. 329, 50–54 (1987). https://doi.org/10.1007/BF00487541
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00487541