Abstract
Barium titanate (BaTiO3)/polymer composite was successfully synthesized by methacryltriisopropoxytitanium (MTPT) and barium alkoxide. MTPT undergoes radical polymerization using azobisisobutyronitrile at temperatures from 90 to 150°C. 1H NMR spectra showed that MTPT reacted with barium alkoxides yielding a complex alkoxide. BaTiO3 particles/polymer was formed after the polymerization and hydrolysis of the complex alkoxide. The transmission electron microscopic observation revealed that crystalline BaTiO3 particles of around 3 nm in size were dispersed in the polymer matrix.
Similar content being viewed by others
References
Schmidt, H., Mater. Res. Soc. Symp. Proc. 32 edited by Brinker, J.C., Clark, D.E., and Uhlrich, D.R., (Elsevier, Amsterdam, 1984) p. 327.
Schmidt, H., J. Non-Cryst. Solid, 73 681 (1985).
Wilkes, G.L., Orler, B., and Huang, H.-H., Polym. Prep. 26, 300 (1985).
Schmidt, H., Chemical Processing of Advanced Materials edited by Hench, L.L. and West, J.K., (John Wiley & Sons, New York, 1992) p. 727.
Sanchez, C. and Inn, M., J. Non-Cryst. Solid 147 & 148, 1 (1992).
Namkamoto, K., Infrared and Raman Spectra of Inorganic and Coordination Compounds, 4th ed. (John Wiley & Sons, New York, 1986) p. 231.
Silverstein, R.M., Bassler, G.C., Morrill, T.C., Spectrometric Identification of Organic Compounds, 5th ed., (John Wiley & Sons, New York, 1991) Chap. 4.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yogo, T., Kikuta, KI., Yamada, S. et al. Synthesis of barium titanate/polymer composites from metal alkoxide. J Sol-Gel Sci Technol 2, 175–179 (1994). https://doi.org/10.1007/BF00486236
Issue Date:
DOI: https://doi.org/10.1007/BF00486236