Abstract
A protective layer has been deposited to improve the scratching properties of polycarbonate organic glasses. The starting solution consists of a mixture of organosilicon compounds, silicon alkoxides or silica colloidal solutions. The deposition is carried out using the dip coating technique. The thickness is about 2–5 µm for the film and 1 mm for the substrate.
Young's moduli of the films are obtained by a new three points bending apparatus. Young's modulus of coating depends both on silica content and on the nature of the silica used as a filler.
Similar content being viewed by others
References
Hanada, T., Bessyo, Y., and Soga, N., J. Non-Cryst. Solids, 113 (1989) 213.
Maddalena, A. and Raccanelli, A., J. Non-Cryst. Solids, 151 (1992) 115.
Schmidt, H., J. Non-Cryst. Solids, 73 (1985) 681.
Dislich, H., Angew. Chem. Int. (Ed. Engl.), 18 (1979) 49.
Timoshenko, S., “Strength of Materials”, Part I & II, ed. D. Van Nostrand Company Inc., N.Y., 1935.
Etienne, P., Thesis, Montpellier II (January 1993).
Bel Hadj, F., Sempere, R., and Phalippou, J., J. Non-Cryst. Solids, 82 (1986) 417.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Etienne, P., Sempéré, R. & Phalippou, J. Mechanical characterization of Ormosil films on plastics: Young's modulus determination by three points bending. J Sol-Gel Sci Technol 2, 171–173 (1994). https://doi.org/10.1007/BF00486235
Issue Date:
DOI: https://doi.org/10.1007/BF00486235