Zusammenfassung
Die Extraktion mit dem Reagens wird bei pH 3 durchgeführt. Als SÄulenmaterial hat sich am besten OV-25 (3% auf Chromosorb HPW, 100–120 mesh, 160–210‡ C) bewÄhrt. C28H58 wird als innerer Standard zugegeben. Noch 0.005 ppm Cr können bestimmt werden. Co, Ni, Zn, Cd, Cu, Fe(III) stören nicht. Pb verursacht Teilung, beeinflu\t jedoch nicht die Peakhöhe.
Summary
The gas-chromatographic determination of Cr(III) and Cr(VI) in aqueous solution using di(trifluoroethyl)dithiocarbamate as an extracting agent (pH 3) is described. Best results were obtained with a column of OV-25 (3% on Chromosorb HPW, 100–120 mesh, 160–210‡ C) C28H58 is added as an internal standard. As little as 0.005 ppm of Cr can be determined. Co., Ni, Zn, Cd, Cu, Fe(III) do not interfere. Pb causes tailing, but does not affect the peak height.
References
Black, M. S., Sievers, R. E.: Anal. Chem. 48, 1872 (1976)
Kawaguchi, H., Sakamoto, T., Mizuike, A.: Talanta 20, 321 (1973)
Ryan, T. R., Vogt, C. R. H.: J. Chromatogr. 130, 346 (1977)
Savory, J., Glenn, M. T., Ahlstrom, J. A.: J. Chromat. Sci. 10, 247 (1972)
Schwedt, G.: Fresenius Z. Anal. Chem. 295, 382 (1979)
Tavlaridis, A., Neeb, R.: Fresenius Z. Anal. Chem. 292, 135 (1978)
WeilbÄcher, A.; Diplomarbeit 1979, Inst. f. Anorg. Chem. u. Analyt. Chem. d. Univ. Mainz
Wolf, W. R.: Anal. Chem. 48, 1717 (1976)
Author information
Authors and Affiliations
Additional information
We thankfully acknowledge the help by DFG (Deutsche Forschungsgemeinschaft) and Verband der Chemischen Industrie. One of the authors (APJ) thanks the Alexander von Humboldt-Stiftung, Bonn, for the award of a fellowship.
Rights and permissions
About this article
Cite this article
Joshi, A.P., Neeb, R. Gas-chromatographic elemental analysis via di(trifluoroethyl)dithiocarbamatochelates. Z. Anal. Chem. 303, 389–393 (1980). https://doi.org/10.1007/BF00469997
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00469997