References
J. M. Hedgepeth, NASA Technical Notes, D-882 (1961).
C. Zweben, Engng. Frac. Mech. 6 (1974) 1.
J. G. Goree and R. S. Gross, ibid. 13 (1979) 563.
H. Fukuda and K. Kawata, Fiber Sci. Technol. 9 (1976) 189.
G. P. Carman, J. J. Lesko and K. L. Reifsnider, in Fourth Symposium on Composite Materials Fatigue and Fracture, ASTM STP 1156 (American Society for Testing and Materials, Philadelphia, Pennsylvania, (1991).
T. F. Maclaughlin, J. Compos. Mater. 2 (1968) 44.
J. Mullin, J. M. Berry and A. Gatti, ibid. 2 (1968) 82.
V. G. Grinius, in Advanced Fibrous Reinforced Composites, 10th SAMPE National Symposium and Exhibit (SAMPE, Covina, California, 1966) p. G1.
D. M. Schuster and E. Scala, AIAA J. 6 (1968) 527.
R. H. Marloff and I. M. Daniel, Exp. Mech. 9 (1969) 156.
O. Okuno and I. Miura, in “Progress in science and engineering of composites”, ICCM-IV, edited by T. H. Hayashi, K. Kawata and S. Umekawa, (Japan Society for Composite Materials, Tokyo, 1982) p. 1107.
J. Yarboro, Soc. Plast. Engrs, Tech. Papers 35 (1989) 1887.
J. J. Lesko, G. P. Carman, B. R. Fogg, W. V. Miller, A. M. Vengsarkar, K. L. Reifsnider and R. O. Claus, Optical Engng. 31 (1992) 13.
N. J. Wadsworth and I. Spilling, J. Appl. Phys. D 1 (1968) 1049.
R. Gulino and S. L. Phoenix, J. Mater. Sci. 26 (1991) 3107.
R. Gulino, P. Schwartz and S. L. Phoenix, ibid. 26 (1991) 6655.
H. D. Wagner and L. Steenbakkers, ibid. 24 (1989) 3956.
H. D. Wagner, M. Rubins and G. Marom, Polym. Compos. 12 (1991) 233.
D. T. Grubb, Z.-F. Li and S. L. Phoenix, in Proceedings of Eighth Technical Conference of American Society for Composites (Technomic, Lancaster, Pennsylvania, 1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, ZF., Grubb, D.T. & Phoenix, S.L. An experimental technique for preparation of multi-fibre model composites. J Mater Sci Lett 13, 1720–1724 (1994). https://doi.org/10.1007/BF00451752
Issue Date:
DOI: https://doi.org/10.1007/BF00451752