This is a preview of subscription content, log in via an institution to check access.
References
A. Gysler and G. Lutjering, in “Titanium science and technology”, Vol. 3, edited by G. Lutjering, V. Zwicker and W. Bunk (Deutsche Gesellschaft für Metallkunde, Oberursel, 1985) p. 2001.
A. M. Adair, F. J. Gurney and A. T. Male, in “Titanium science and technology”, edited by R. I. Jaffee and H. M. Burte (Plenum Press, New York, 1973) p. 1755.
N. L. Richards and J. T. Barnaby, Mater. Sci. Engng 26 (1976) 221.
M. G. Ulitchcny, H. J. Rack and D. B. Dawson, ASTM-STP 651 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1978) p. 17.
C. G. Rhodes, in “Titanium science and technology”, Vol. 3, edited by G. Lutjering, V. Zwicker and W. Bunk (Deutsche Gesellsehaft für Metallkunde, Oberursel, 1985) p. 2009.
J. C. Chesnutt, A. W. Thompson and J. C. Williams, in “Titanium '80: science and technology”, Vol. 3, edited by H. Kimura and O. Izumi (Metals Society of the American Institute of Mining, Metallurgical and Petroleum Engineers, Warrendale, Pennsylvania, 1980) p. 1876.
R. F. Vaughn, P. A. Blenkinsop and H. A. Holl, ibid. p. 1646.
J. Y. Wang, C. X. Cao and G. Q. Chen, ibid. Vol. 2, p. 1163.
R. W. Judy, Jr, B. B. Rath and R. J. Goode, in “Titanium science and technology”, Vol. 3, edited by G. Lutjering, V. Zwicker and W. Bunk (Deutsche Gesellschaft für Metallkunde, Oberursel, 1985) p. 1925.
Z. Fan, A. P. Miodownik and P. Tsakiropoulos, Mater. Sci. Technol. (in press).
J. Gurland, Trans. Metall. Soc. AIME 212 (1958) 452.
H. C. Lee and J. Gurland, Mater. Sci. Engng 33 (1978) 125.
Z. Fan and A. P. Miodownik, Acta Metall (in press).
Z. Fan, P. Tsakiropoulos, P. A. Smith and A. P. Miodownik, Phil. Mag. 67 (1993) 515.
Z. Fan, P. Tsakiropoulos and A. P. Miodownik, Mater. Sci. Technol. 8 (1992) 922.
M. A. Greenfield and H. Margolin, Met. Trans. 2 (1971) 841.
J. C. Chesnutt, C. G. Rhodes and J. C. Williams, ASTM-STP 600 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1976) p. 99.
T. Kishi, H. S. Park, R. Horiuchi, T. Kakimi, M. Nakanose and T. Takabe, in “Titanium '80: science and technology”, Vol. 3, edited by H. Kimura and O. Izumi (Metals Society of the American Institute of Mining, Metallurgical and Petroleum Engineers, Warrendale, Pennsylvania, 1980) p. 1709.
B. W. H. Lowe and M. W. Kearns, in “Titanium science and technology”, Vol. 1, edited by G. Lutjering, V. Zwicker and W. Bunk (Deutsche Gesellschaft für Metallkunde, Oberursel, 1985) p. 523.
G. Terlinde, H.-J. Rathjen and K.-H. Schwalbe, Met. Trans. 19A (1988) 1037.
D. H. Rogers, in “Titanium science and technology”, edited by R. I. Jaffee and H. M. Burte (Plenum Press, New York, 1973) p. 1719.
R. E. Curtis and W. F. Spurr, Trans. ASM 61 (1968) 1115.
J. P. Hirth and F. H. Froes, Met. Trans. 8A (1977) 1165.
R. H. Van Stone, T. B. Cox, J. R. Law, Jr and J. A. Psioda, Int. Met. Rev. 30 (1985) 157.
P. F. Thomason (editor), “Ductile fracture of metals” (Pergamon Press, Oxford, 1991).
H. Margolin, Met. Trans. 13A (1982) 2191.
H. Margolin and Y. Mahajan, ibid. 9A (1978) 781.
H. Margolin, J. C. Williams, J. C. Chesnutt and G. Lutjering, in “Titanium '80: science and technology”, Vol. 1, edited by H. Kimura and O. Izumi (Metals Society of the American Institute of Mining, Metallurgical and Petroleum Engineers, Warrendale, Pennsylvania, 1980) p. 169.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fan, Z., Miodownik, A.P. On the fracture toughness of α-ß titanium alloys. J Mater Sci Lett 12, 1665–1668 (1993). https://doi.org/10.1007/BF00418824
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00418824