Abstract
The paper presents an Intelligent CAD system for Fermentation Process Control (FPC-ICAD) based on a hierarchical architecture possessing three levels: real-time supervision level, CAD level and learning level. The aims of the learning are mainly composed of the aspects fermentation process modelling, determination of appropriate control and estimation methods, determination of the corresponding parameters and fermentation monitoring through measurement and software management. Three independent, but interactive software packages allow user to organize his system for different purposes: on-line control system (with only supervision), off-line CAD as a teaching software, off-line intelligent CAD (CAD+learning package), and on-line intelligent CAD.
Similar content being viewed by others
References
Lamont, G. B.: Educational expert system for Computer-Aided-Design of control system. Proc. of IEEE-CACSD. Hyatt Regency (1989) 143–151
Lewin, D. R.; Morari, M.: ROBEX: An expert system for robust control design. Presentation at ACC. Minneapolis: June, 1987
Boyle, J. M.; Pang, G. K.; Macfarlane, A. G. J.: The development and implementation of MAID: A knowledge based system for use in control system design. Presentation at INRIA Conference. France: January, 1988
Steyer, J.; Uribelarrea, J. L.; Simoes, D.: Pourciel, J. B.: A help for biotechnology, a Real Time Expert System for the Control of Fed-Batch Fermentation. Proc. of IMACS-IFAC., Brussels (1990) VIII.B1-1–VIII.B1-5
Queinnec, I.; Pourciel, J. B.: Real Time Control of a Biotechnological Process. Proc. of ISMM., Zurich (1989) 273–276
Chamilothoris, G.; Sevely, Y.: Adaptive control of biomass and substrate concentration in a continuous-flow fermentation process. APII-RAIRO. 22 (1988) 159–179
Dahhou, B.: Multivariable pole placement adaptive control of a fermentation process. Presentation at IMACS SMS '88. Certraro Italy: September, 1988
Lakrori, M.; Cheruy, A.: Some results and possibilities in L/A control of bioprocess. Presentation at DECHEMA Meeting on Adaptive Control and Expert System for Biotechnical Process Control. Frankfurt RFA: June, 1989
Vigié, P.; Dahhou, B.; Queinnec, I.; Lakrori, M.; Cherruy, A.; Pourciel, J. B.: Control of substrat concentration in a continuous bioprocess. (To appear in International Journal Bioprocess Engineering)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dahhou, B., Queinnec, I., Zeng, F.Y. et al. FPC-ICAD: an intelligent CAD for fermentation process control. Bioprocess Engineering 7, 157–163 (1991). https://doi.org/10.1007/BF00387411
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00387411