Summary
The principal aspects governing the research activities in mechanical woodworking are dealt with. A basic knowledge of the technology within the mechanical woodworking is gradually growing up making the machines, tools, and the process itself more effective. Far too little attention has hitherto been paid to the system man-machine, and there is a lot to achieve by getting a better co-ordination in this relationship. Further, the efforts to reduce the waste or to convert the waste wood to a shape more suitable for industrial use are striking.
Similar content being viewed by others
References
Abeels, P. 1966a. Le sciage de l'Epicea à la scie à ruban. Centre Belge du Bois, Saint-Hubert.
— 1966b. Conduite et interprétation des essais de sciage. Centre Belge du Bois, Saint-Hubert.
Antoine, R. 1964. “Static” sawing and pulpable kerf material. Timber Trades J. 250 (4589): 53–55.
Aoyama, T. 1964. An experiment on variation of band saw speed. Bulletin of the Government Forest Experiment Station, No 163.
Barz, E. 1966. Standzeitverlängerung bei Holzbearbeitungswerkzeugen durch Hartverchromung. Holz Roh- Werkstoff 24 (12): 593–597.
— 1969. Kurzverfahren zur Prüfung der Verschleißwirkung und der Zerspanbarkeit von Holz und Holzwerkstoffen. Holz Roh- Werkstoff, 27: 153–157.
— 1968. Prüfung und Beurteilung des Richt- und Spannungszustandes bei Kreissägeblättern für die Holzbearbeitung. Holz Roh- Werkstoff, 26 (5): 170–175.
Bier, H., Hanicke, P. 1963. The specific cutting force as a function of the blunting of knife edges in rotary cutting. Holztechnol. 4 (2): 158–162.
Birkeland, R. 1967. Investigations on sawing accuracy for big bandsaws when sawing frozen and unfrozen logs with different feed speeds and different swage sizes. Norsk Treteknisk Institutt, Bulletin No. 30.
—, Hvamb, G. 1967. Studies of sawing accuracy of bandsaws when sawing frozen and unfrozen logs. Norsk Treteknisk Institutt, Bulletin No. 23, and Norsk Skogind. 17 (1963) (8): 283–289.
Bryan, E. L. 1963. High energy jets as a new concept in wood machining. For. Prod. J. 13 (8): 305–312.
Clarke, L. N. 1963. A new dynamometer for measuring cutting forces in three dimensions. CSIRO, Division of Forest Products, Technological Paper No. 30.
Cumming, J. D. 1967. Control of band saw behavior. Proceed. of a conference at the University of Calif. Forest Products Lab., Richmond.
Davis, E. M. 1962. Machining and related characteristics of United States hardwoods. US Dep. of Agr., Forest Service, Technical Bulletin No. 1267.
Dickinson, F. E. 1967. Neuere Entwicklung bei der Erzeugung von Schnittholz und Furnieren in den USA. Holz Roh- Werkstoff 25 (2): 68–75.
Dobie, J., Sturgeon, W. J., Wright, D. M. 1967. Analysis of the production characteristics of chipper headrigs, scrag mills and log-gang mills. Can. Dep. Forestry and Rural Development. Forest Products Lab. Inform. Rep. VP-X-21, Vancouver.
Edamatsu, N. 1961. On the bandsawing of timber in Japan. Hokkaido Forest Products Res. Inst., Asahikawa, Hokkaido, Japan.
Edamatsu, N. 1965. Characteristic problems in sawing with the frame saw. Wood Ind. 20 (8).
Endersby, H. J. 1956. The blunting of wood cutting edges. Dep. of scientific and industrial research, Forest Products Research, Special Report No. 11.
Englesson, T., Hvamb, G., Thunell, B. 1954. Några resultat från undersökningar över med- och motsågning. Svenska Träforskningsinstitutets trätekniska avdelning. Meddelande No. 53 B.
Esterer, M., Blasy, M. 1969. Das moderne Sägewerk — Teil 1. Die Maschinen des modernen Sägewerkes. Holz Roh- Werkstoff 27: 125–147.
Fleischer, H. O., Lutz, J. F. 1963. Technical consideration for manufacturing southern pine plywood. For. Prod. J. 13: (1) 39–42.
Fleming, H. 1955. Holzbearbeitung durch Vibrationstechnik. Holz-Zbl. No. 153.
Franz, N. 1967. Jet cutting. Proceed. of a conference at the University of Calif. Forest Products Lab., Richmond.
Fujii, Y., Sugihara, H., Furutani, S. 1967. Observation on wood cutting situation of single chain-saw tooth with a high speed camera. Kyoto University Forests, Bulletin No. 39.
Fukui, H., Kinura, S. 1968. Face bevel angle and hook angle of carbide tipped saws in sawing wood particle board and fiber board. Wood Ind. 23 (3): 21–24.
Ghose, S. 1967. Effects of microbeveling. Proceed. of a conference at the University of Calif., Forest Products Lab., Richmond.
Hartler, N. 1963. Some model studies of wood chipping in a laboratory machine. Svensk Papperstid. 66 (16): 587–599.
Hasden, S. M. et al. 1964. Cutting forces on a deep-cutting frame saw. Derev. Prom. 13 (12): 14–15.
Hillis, W. E., McKenzie, W. M. 1964. Chemical attack as a factor in the wear of wood-working cutters. For. Prod. J. 14 (7): 310–312.
Hemelryck, M. Van. 1965. Mesures de sciage. Laboratoire Forestier de l'Etat, Gembloux.
Jones, D. S. 1965. An experimental analysis of saw tooth stress and deflection. IUFRO, Section 41, October Meeting, Melbourne.
Johnston, J. S. 1968. Experiments in crosscutting wood with shear blades. For. Prod. J. 18 (3): 85.
Juvonen, K. 1967. The influence of saw kerf and overmeasure (allowances for shrinkage and inaccurate sawing) on economy and recovery in sawmilling operations: study by digital computer. Paperi Puu 49 (10).
Kempe, C. 1964. Krafter och skador vid hydraulisk trädklipping. Kungl. Tekn. Högskolan, Träets mek. teknologi, licentiatarbete, Stockholm.
McKenzie, W. M. 1962. The effects of edge condition in wood cutting. CSIRO, Division of Forest Products, Report 1 Experiment U. 11-11/1.
— 1966. Die Grundanforderungen an Schneideinrichtungen für Holz als Zerspanungswerkstoff. Holz Roh- Werkstoff 24 (9): 380–389.
— 1967a. The basic wood cutting process. Proceed. of a conference at the University of Calif. Forest Products Lab., Richmond.
— (1967b). Friction in wood cutting. For. Prod. J. 17 (11): 38–43.
— 1964. Basic aspects of inclined or oblique cutting. For. Prod. J. 14 (12): 555–565.
Kitayama, S., Sugihara, H. 1968. On noise analysis of bandsaw machine. J. Japan Wood Res. Soc. 14 (3): 140–147.
Kivimaa, E. 1950. Cutting force in woodworking. State Institute for Technical Research, VTT Publication No. 18.
— 1952. Was ist die Abstumpfung der Holzbearbeitungswerkzeuge. Holz 10: 425.
Koch, P. 1967a. Development of the chipping headrig. Southern Forest Experiment Station, Forest Service, 1967.
— 1967b. Too many crooked small logs? Consider a shaping-lathe headrig! Southern Lumberman 215 (2680): 147–149.
Koch, P. 1968. Wood Machining Abstracts 1966 and 1967. US Dept. of Agriculture, Forest Service Research Paper So-34.
Koch, P., McMillin, C. W. 1966. Wood Machining Review 1963 through 1965. For. Prod. J. 16 (9, 10).
Kumarov, G. A. 1964. Interaction of the cutter with the wood in transverse milling. Lesn. Z. (Arhangel'sk) 7 (4): 107–112.
Lombardi, J. 1954. La scie à ruban. Un problème cinématique et statique. Schweizerische Bauzt. 75 (25): 359–363.
Lutz, J. F. 1967a. Effect of moisture content in wood and speed of cut on quality of rotary-cut veneer. Proceed. of a conference at the University of Calif., Forest Products Lab., Richmond.
Lutz, J. F. 1967b. A survey of some developments in slicing and veneer cutting. IUFRO-Congress Proceed., Section 41, Munich.
Lutz, J. F., Mergen, A., Panzer, H. 1967c. Effect of moisture content and speed of cut on quality of rotary-cut veneer. U.S. Dept. of Agr. Forest Service Res. Note FPL-0176.
— 1966. Effects of horizontal roller-bar openings on quality of rotarycut southern pine and yellow-poplar veneer. For. Prod. J. 16 (10): 15–25.
Melichar, J. 1964. Anwendungsmöglichkeiten mathematischer Methoden bei der operativen Produktionsplanung in der Sägeindustrie. Holztechnol. 5 (4): 259–264.
Mori, M. 1963. Wood surface machined with circular saw. Wood Ind. 18 (5).
Mori, M., Hoshi, T. 1963. Studies on surfacing of wood with planer (II)—Effect of cutting factors on the surface quality of finish. Forest Experiment Station Meguro, Bulletin No. 160.
Mori, M., Hoshi, T. 1964. Studies on the surfacing of wood with planer (III) — On the precision of jointing the knives, and (IV) Effect of “land” at knife edge upon cutting efficiency. Forest Experiment Station Meguro, Bulletin No. 163, p. (III) 47–64, (IV) 65–76.
Mote, C. D. Jr. 1963a. Wood cutting tool streeses. For. Prod. J. 12 (5): 203–207.
Mote, C. D. Jr. 1963b. Effect of in-plane stresses on the vibrational characteristics of clamped-free discs. Thesis at the University of Calif. Dept. Eng.
— 1962. Stress distribution in the wood ahead of a cutting tool. For. Prod. J. 12 (9): 447–451.
Nakamura, G. 1967. Effect of rotation of saw spindle to cutting force in circular sawing. J. Japan Wood Res. Soc. 13 (6): 232–237.
Narayanamurti, D., Prasad, B. N., Singh, K. 1963. Temperature changes in wood working tools. Norsk Skogind. 17 (9).
Nosovskii, T. A. 1963. The effect of bluntness in wood-cutting tools on cutting force, taking into account direction of grain and wood species. Lesn. Z. (Arhangel'sk) 6 (3): 102–106.
Pahlitzsch, G. 1966. Internationaler Stand der Forschung auf dem Gebiete des Hobelns und Fräsens von Holz und Holzwerkstoffen. Holz Roh-Werkstoff 24 (12): 579–593.
— 1961. Über das Wesen der Abstumpfung von Schleifbändern beim Bandschleifen von Holz. Holz Roh-Werkstoff 19 (4): 136–149.
— 1965. Beobachtungen über das Abstumpfungsverhalten beim Fräsen von Schichtstoff-Verbundplatten. Holz Roh-Werkstoff 23 (4): 121–125.
— 1966a. Über das Schwingungsverhalten von Kreissägeblättern —Erste Mitteilung: Bestimmung und Auswirkungen der geometrischen Form und des Vorspannungszustandes der Sägeblätter. Holz Roh-Werkstoff 24 (4): 125–134.
— 1966b. Über das Schwingungsverhalten von Kreissägeblättern — Zweite Mitteilung: Ermittlung und Auswirkungen der kritischen Drehzahlen und Eigenfrequenzen der Sägeblätter. Holz Roh-Werkstoff 24 (8): 341–345.
Peters, C. C. 1967. Thick slicing. Proceed. of a conference at the University of Calif. Forest Products Lab., Richmond.
Petrovskij, V. S. 1964. Construction of an automatic optimization system for cross-cutting stems, with the aim of using digital computers to control the breaking down of tree-length logs. Z. (Arhangel'sk) 7 (4): 147–157.
Row, C., Fasick, C., Guttenberg, S. Improving sawmill profits through operations research. U.S. Forest Service, South Forest Exp. Sta. Research Pap. SO-20.
Saito, Y. 1963. Wood surface machined with sawing machinery. Wood Ind. 18 (5).
Salemme, J. F. 1967. Thin circular saws. Proceed. of a conference at the University of Calif. Forest Producis Lab., Richmond.
Sederholm, J. 1969. Skärning av trä med vibrerande kniv. Kungl. Tekniska Högskolan, Träets mek. teknologi, licentiatarbete, Stockholm.
Siapno, A. E. 1963. The effect of lathe nosebar compression on the moisture content and quality of dried veneer. Philippine J. Forest. 19 (1/4): 1–14.
Solovev, A. A. 1962. The kinematics of vibration cutting. Lesn. Z. (Arhangel'sk) 5 (6): 114–124
Sugihara, H. 1953. On the force acting on bandsaw blades. Wood Ind. 8 (74): 225–232.
Sugihara, H., Sumiya, K. 1955. A theoretical study on temperature distribution of circular saw-blade. Wood Research, Bulletin of the Wood Research Institute, Kyoto University, No. 15.
Thunell, B. Redogörelse för forskningsverksamheten vid Svenska Träforskningsinstitutets trätekniska avdelning. Svenska Träforskningsinstitutet, Redogörelse för verksamheten under budgetåret 1952–53, p. 15–17.
Thunell, B. 1951. Fortschritte bei der Zerspanungsforschung von Holz. Holz 9 (1).
— 1966a. Die Maßgenauigkeit beim Einschnitt von Rundholz. Holz Roh-Werkstoff 24 (12): 598–602.
— 1966b. Der Einfluß des Vorschubes und der Blattdicke auf die Maßhaltigkeit bei Gattersägen. Holz Roh-Werkstoff 24 (11): 548–551.
Thunell, B. 1968. On the chip thickness in a frame saw. Paperi Puu 50 (3).
— 1962. The influence of sawtooth dimensions on lateral stability. Holztechnol. 3 (2): 145–149.
Thunell, B., Norén, B. 1964. Stability investigations on frame saw blades. Parts. 1, 2, 3, 4, 5. Paperi Puu 46 (8, 10, 11, 12).
Thunell, B., Wallin, G. 1966. Influence of sawing conditions on cutting forces in frame sawing. Paperi Puu 48 (12).
Thunell, B. 1967. Effect of knots on the cutting forces in frame sawing. Paperi Puu 49 (2).
Wallin, G. 1968. Att röntga trä. Föreningen Svenska Sågverksmäns 26: e årsmöte, p. 59–69.
Wardrop, A. B., Addo-Ashong, F. W. 1965. The anatomy and fine structure of wood in relation to its mechanical failure. CSIRO, Division of Forest Products, Report 560.
Wiklund, M. 1967. Krafter och skador vid fällning och kapning med klipp- och skärdon. Forskningsstiftelsen Skogsarbeten, redogörelse No. 9.
Wiklund, M. 1968. Undersökning av värmebalansen vid träbearbetning med kutterstål när matningen är noll. Kungl. Tekniska Högskolan, Träets mek. teknologi, licentiatarbete, Stockholm.
Voskresenskii, S. A. 1960. Wood cutting (transl. from Russian Rezanie Drevesiny, Moskow Institute of Forestry 1955). Department of Scientific and Industrial Research, London.
Wüster, E. 1966a. Die Veränderung der Anziehkräfte der Vorspannsägen durch die Schnittkraft. Holz Roh-Werkstoff 24 (5): 212–216.
— 1966b. Die Berechnung der Reckvorspannungen in Gatter- und Bandsägeblättern. Holz Roh-Werkstoff 24 (4): 134–144.
— 1967. Die Schnittführungen beim Schneiden von Holz. Centrbl. f. d. ges. Forstw. 84 (2–6): 408–426.
Yamaguchi, K. 1967. Electroarc depositing of hard metal on saw tooth. Bulletin of the Government Forest Experiment Station Tokyo, No. 200.
Author information
Authors and Affiliations
Additional information
Prepared for the 2nd IAWS Plenary Meeting, Paris, June 1969.
Rights and permissions
About this article
Cite this article
Thunell, B. Research trends in mechanical woodworking. Wood Science and Technology 5, 63–72 (1971). https://doi.org/10.1007/BF00363121
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00363121