Summary
Structure-property relationships of blends of a thermotropic polyester-type main-chain LCP and polybutylene terephthalate (PBT) were investigated. LCP was melt blended with three different PBTs and the blends were processed by injection moulding or extrusion. Mechanical and thermal properties of the blends were determined and the blend structure was characterized by scanning electron microscopy (SEM). LCP acted as mechanical reinforcement for PBT and improved also its dimensional and thermal stability. The stiffness of PBT increased with increasing LCP content, but at the same time the blends became more brittle. In extrusion the orientation of LCP phases could be further enhanced by additional drawing, which led to significant improvements in strength and stiffness at LCP contents of 20–30 wt.-%.
Similar content being viewed by others
References
Jackson W J Jr., Kuhfuss H F (1976) J Polym Sci, Polym Chem Ed 14: 2043.
Chung T-S (1986) Polym Eng Sci 26: 901.
Schacht T (1986) Spritzgiessen von Liquid-Crystal Polymeren, Doctoral Thesis, Rheinisch-Westfälischen Technischen Hochschule Aachen, Germany.
Ide Y, Ophir Z (1983) Polym Eng Sci 23: 261.
Ophir Z, Ide Y (1983) Polym Eng Sci 23: 792.
Sawyer L C, Jaffe M (1983) J Mat Sci 21: 1897.
Brostow W, Dziemianowicz T S, Romanski J, Werber W (1988) Polym Eng Sci 28: 785.
Kimura M, Porter R S (1984) J Polym Sci, Polym Phys Ed 22: 1697.
Joseph E G, Wilkes G L, Baird D G, Preliminary Thermal and Structural Studies of Blends Based on a Thermotropic Liquid Crystalline Copolyester and Poly-(ethylene) Terephtalate. In A. Blumstein (ed.) Polymeric Liquid Crystals. Plenum Press, New York and London, pp. 197–216.
Siegmann A, Dagan A, Kenig S (1985) Polymer 26: 1325.
Weiss R A, Chung N, Kohli A (1989) Polym Eng Sci 29: 573.
Blizard K G, Baird D G (1986) Polym News 12: 44.
Min K, White J L, Fellers J F (1984) Polym Eng Sci 24: 1327.
Baird D G, Sun T, Done D S, Wilkes G L (1990) J Thermoplast Composite Mat 3: 81.
Seppälä J V, Heino M T, Kapanen C (1992) J Appl Polym Sci 44: 1051.
Heino M T, Seppälä J V (1992) Int J of Materials and Product Technology 7: 56.
Ramanathan R, Blizard K., Baird D (1988) SPE ANTEC 46: 1123.
Nobile M R, Amendola E, Nicolais L, Acierno D, Carfagna C (1989) Polym Eng Sci 29: 55.
Malik T M, Carreau P J, Chapleau N (1989) Polym Eng Sci 29: 600.
Kohli A, Chung N, Weiss R A (1989) Polym Eng Sci 29: 573.
Heino M T, Seppälä J V (1992) J Appl Polym Sci 44: 2185.
Kiss G (1987) Polym Eng Sci 27: 410.
Isayev A I, Modic M (1987) Polym. Compos. 8: 158.
Vectra Flüssigkristalline Polymere (LCP), brochure by Hoechst Celanese, September 1989/1. Auflage.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Heino, M.T., Seppälä, J.V. Studies on blends of a thermotropic liquid crystalline polymer and polybutylene terephthalate. Polymer Bulletin 30, 353–360 (1993). https://doi.org/10.1007/BF00343072
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00343072