Summary
Iron(III) is sorbed by polyether type open-cell polyurethane foams from HCl solutions of 4 mol/l or higher. The capacity of the foams is around 50 mg·l−1. The iron (III) sorbed can be eluted from the foam with 0.01 mol/l HCl or distilled water. An optimization of the sorption conditions showed that the process can be used for analytical applications. The polyurethane foam sorbents examined did not sorb iron(II). The mechanism of sorption by polyether foams seems to follow a mechanism similar to that of the extraction of iron(III) by etheric solvents.
Similar content being viewed by others
References
Braun T, Farag AB, Navratil J (1985) Polyurethane foam sorbents in separation science. CRC Press, Boca Raton
Braun T (1989) Fresenius Z Anal Chem 333:785
Bowen HJM (1970) J Chem Soc A:1082
Gesser HD, Bock E, Baldwin WG, Chow A, McBride DW, Lipinsky W (1976) Sep. Sci 11:317
Gesser HD, Horsfall GA, Gough KM, Krawchuk B (1977) Nature 268:323
Oren JJ, Gough KM, Gesser HD (1979) Can J Chem 57:2032
Gesser HD, Gupta BM (1989) J Radioanal Nucl Chem 132:37
Chalkey DE, Williams RJP (1955) J Chem Soc 1920
Nachtrieb NH, Frywell RE (1948) J Am Chem Soc 70:3552
Lo VSK, Chow A (1981) Talanta: 28:157
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Drtil, M., Tölgyessy, J. & Braun, T. Sorption of iron(III) and iron(II) from acidic chloride solutions by polyether and polyester type polyurethane foams. Fresenius J Anal Chem 338, 50–53 (1990). https://doi.org/10.1007/BF00322784
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00322784