Summary
A graft copolymer of poly(ethylene glycol) onto nylon 6 was prepared by two-step reactions; poly(ethylene glycol) (PEG) was chlorinated with thionyl chloride in carbon tetrachloride and the chlorinated PEG was then grafted onto nylon 6 by reacting each other with triethylamine and tin chloride in o-chlorophenol. Blends were also prepared from the graft copolymer with nylon 6 or PEG. The thermal properties and crystalline structure of the graft copolymer and the blends were studied using differential scanning calorimeter and X-ray diffractometer. It was found that the grafting of PEG onto nylon 6 changed the crystal structure of nylon 6. It was observed that compatibilization of the nylon 6/PEG blend of 50/50 composition by weight was achieved in the presence of the graft copolymer.
Similar content being viewed by others
References
Zimmerman J; Polyamides, Saunders, J-H; Polyamide Fibers; Welgos, R-J; Polyamide Plastics (1988), In Mark H-F, et al. (ed.) Wiley, New York, (Encyclopedia of Polymer Science and Engineering, vol. 11, pp. 315–476).
Gaylord N-G (1975) Copolymers, Polyblends and Composites In: Platzer, N-A-J (ed.), Am. Chem. Soc., Wahsington D.C. (Advances in Chemistry Ser., 142, p. 76)
Paul D-R, Locke C-E, and Vinson C-E. (1973) Polym. Eng. Sci., 13:202
Locke C-E and Paul D-R (1973) J. Appl. Polym. Sci., 17:2597
Sakurada I. Yashyoshi S, and Yasui S (1964) Polymer, 78:37
El-Rafie M-H, Khalil M-I, and Hebeish A (1975) J. Appl. Polym. Sci., 19:1677
Seo S-W, Jo W-H, and Ha W-S (1984) J. Appl. Polym. Sci., 29:567
Yun N-K, Ha C-S, and Cho W-J (1988) Polymer (Korea) 12, 6:540
Traugott T-D, Barlow J-W, and Paul D-R (1983) J. Appl. Polym. Sci., 28:2947
Cimmino S, Dorazio L, Greco R, Maglio G, Malinconico M, Mancarella C, Martuscelli E, Palumbo R, and Ragosta G (1984) Polym. Eng. Sci., 24:48
Candau F, Tarome F-A, and Rempp P (1977) Polymer, 18:1253
Harris J-M (1985) JMS-REV. Maromol. Chem. Phys., C.25:325
Zalipsky S, Gilson C, and Zilkha A (1986) Eur. Polym. J., 12:1177
Zalipsky S and Barany G (1986) Polymer Preprint, 27:1
Skoog D-A and West D-M (1979) Analytical Chemistry, Saunders College, Philadelphia
Kennedy J-P (1975) J. Polym. Sci., Polym. Chem. Ed., 13:2213
Kargin V-A (1963) J. Polym. Sci., Part C (4) :1601
Parker J-P and Lindenmeyer P-H (1977) J. Phys. Sci., 21:821
Park M-S, Lee S-W, and Chang D-H (1984) J. Kor. Text. Eng. &Chem., 21, 5:17
Lindsey C-R, Paul D-R, and Barlow J-W (1981) J. Appl. Polym. Sci., 26:1
Barlett DW, Barlow J-W, and Paul D-R (1982) J. Appl. Polym. Sci. 27:2351
Rudin A (1982) The Elements of Polymer Science and Engineering, Academic Press, New York, p. 459.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ha, C.S., Choi, H.Y. & Cho, W.J. Synthesis of nylon 6-g-poly(ethylene glycol) copolymer and its compatibilizing effect in nylon 6/poly(ethylene glycol) blends. Polymer Bulletin 25, 185–192 (1991). https://doi.org/10.1007/BF00310790
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00310790