Abstract
The fracture behavior of a reaction injection molded (RIM) polyamide block copolymer reinforced with randomly arranged continuous glass fiber bundles (glass mats) was studied under dynamic loading conditions at T=RT and T=-40 °C. Dynamic fracture toughness, Kd, and fracture energy, Gd, values were derived from instrumented high-speed impact bending tests carried out on Charpy and Izod specimens of different size and notching direction, respectively. It was established that fracture mechanics data depend on the ligament width of the specimens. It was shown how the “inherent” flaws caused by machining and molding can be determined. Failure mode of the composites was characterized by fractography and possible failure events were summarized. Recommendations were given for further material improvements.
Similar content being viewed by others
References
Williams, J.G.: Fracture Mechanics of Polymers, Ellis Horwood Ltd., Chichester, 1984
Savadori, A.:Polym. Test., 5 (1985), 209
Plati, E. and Williams, J.G.:Polym. Eng. Sci., 15 (1975), 470
Callear, J.E. and Shortall, J.B.:J. Mater. Sci., 12 (1977), 141
Karger-Kocsis, J. and Friedrich, K.:Plast. Rubb. Process. Appl., 12 (1989), 63
Akay, M. and Barkley, D.:Polym. Test., 7 (1987), 391
Otaigbe, J.U. and Harland, W.G.:J. Appl. Polym. Sci., 37 (1989) 77
Karger-Kocsis, J.: Structure and fracture mechanics of injection molded composites in “Encyclopedia of Composites” (Ed.: Lee, S.M.), VCH Publ., N.Y., (to be appeared)
Friedrich, K. and Karger-Kocsis, J.: Fracture and fatigue of unfilled and reinforced polyamides and polyesters in “Solid State Behavior of Linear Polyesters and Polyamides” (Eds.: Schultz, J. M and Fakirov, S.), Prentice Hall Inc. Englewood Cliff, 1990, p.248
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Karger-Kocsis, J. Dynamic fracture mechanics of a RIM polyamide block copolymer reinforced with glass strand mat. Polymer Bulletin 24, 341–348 (1990). https://doi.org/10.1007/BF00306585
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00306585