Summary
We report here on the apparent compatibility of a series of n-alkane/PDMPO blends. Three alkanes were examined [eicosane (C20), tetracosane (C24), and Polywax 2000 (nominally C142)] as blends of 5, 10, 15, and 20 wt.% alkane with PDMPO. Samples were judged to be compatible or incompatible according to three criteria: (a) visual appearance, i.e., transparent vs. opaque molded specimens, (b) the presence or absence of an alkane crystalline melting peak in a DSC thermogram, and (c) downward shifts in the PDMPO-rich phase glass transition temperatures from the T g range of 195–200°C for PDMPO homopolymer. The T u>Tm alkane component transition has not been observed in any of the blends prepared to date.
Similar content being viewed by others
References
F.J. Balta-Calleja, K.D. Berling, H. Cackovic, R. Hoseman, and J. Laboda-Cackovic, J. Macromol. Sci., Phys., B12, 383–392 (1976).
J.K. Kruger, L. Peetz, W. Wildner, and M. Pietralla, Polymer, 21, 620–626 (1980).
M. Pietralla and J.K. Kruger, Polym. Bull., 2, 663–669 (1980).
L.R. Denny and R.F. Boyer, Polym. Bull., 4, 527–534 (1981).
H.P. Grossmann, W. Dollhopf, and J.K. Kruger, Polym. Bull., 9, 593–597 (1983).
J.K. Kruger, G.W. Hohne, and M. Pietralla, Polym. Bull., 9, 252–253 (1983).
R.F. Boyer, K.M. Panichella, and L.R. Denny, Polym. Bull., 9, 344–347 (1983).
J.K. Kruger, personal communication, Midland, Michigan, August 1985.
S.E. Keinath and R.F. Boyer, J. Appl. Polym. Sci., 28, 2105–2118 (1983).
S.E. Keinath, Soc. Plast. Eng., Tech. Pap., 31, 357–360 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dunker, K.W., Keinath, S.E. Apparent compatibility in n-alkane/poly(dimethyl phenylene oxide) blends. Polymer Bulletin 17, 523–529 (1987). https://doi.org/10.1007/BF00283088
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00283088