References
B. Toloui, in Proceedings of the Fifth International Conference on Composite Materials (ICCM-V), edited by W. C. Harrigan, J. Strife and A. K. Dhingra (The Metals Society-American Institute of Mining, Metallurgical and Petroleum Engineers, Warrendale, Pennsylvania, 1985) P. 773.
A. G. Metcalfe, in “The interfaces in metal matrix composites”, Vol. 1, edited by A. G. Metcalfe (Academic Press, New York, 1974) P. 112.
P. K. Brindley, in “High temperature ordered intermetallic alloys”, Vol. 11, edited by N. S. Stoloff, C. C. Koch, C. T. Liu and O. Izumi (Materials Research Society, Pittsburgh, Pennsylvania, 1987) P. 419.
R. Bowman and R. Noebe, Adv. Mater. Processes 136–138 (1989) 35.
S. Krishnamurthy, in “Interfaces in metals-ceramics composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (The Metals Society, Warrendale, Pennsylvania, 1990) P. 75.
W. S. Johnson, S. J. Lubowinski, A. L. Highsmith, W. D. Brewer and C. A. Hoogstraten, NASA Tech. Memo. 1014, NASA Langley Research Center, Hampton, Virginia, unpublished research (1988).
D. R. Schuyler, M. M. Sohi and R. Mahapatra, in “Interfaces in metals-ceramics composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (The Metals Society, Warrendale, Pennsylvania, 1990) P. 475.
P. R. Smith, C. G. Rhodes and W. C. Revelos, ibid.in, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (The Metals Society, Warrendale, Pennsylvania, 1990) P. 35.
R. A. Storer, in “Annual book on ASTM standards”, Sect. 8, Vol. 08.01 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1989) P. 280.
R. J. Arsenault, in “Metal matrix composites: mechanisms and properties”, edited by R. K. Everett and R. J. Arsenault (Academic Press, San Diego, California, 1991) P. 133.
P. R. Smith, F. H. Froes and J. T. Cammett, in “Fracture modes of composites”, Vol. VI, edited by J. A. Cornie and F. W. Crossman (Metallurgical Society of the American Institute of Mining, Metallurgical and Petroleum Engineers, Warrendale, Pennsylvania, 1977) P. 143.
P. K. Brindley, S. L. Draper, M. V. Nathal and J. I. Eldridge, in “Fundamental relationships between microstructure and mechanical properties of metal matrix composites”, edited by P. K. Liaw and M. N. Gungor (The Metals Society, Warrendale, Pennsylvania, 1990) P. 387.
C. A. Blue and R. Y. Lin, Unpublished research, University of Cincinnati, Cincinnati, Ohio (1992).
N. L. Hansen, in “Engineered materials handbook, composites”, Vol. 1, edited by T. J. Reinhart (American Society of Metals International, Metals Park, Ohio, 1987) P. 112.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Warrier, S.G., Blue, C.A. & Lin, R.Y. Infiltration of titanium alloy-matrix composites. J Mater Sci Lett 12, 865–868 (1993). https://doi.org/10.1007/BF00278000
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00278000