References
M. J. Reece, F. Guiu and M. F. R. Sammur, J. Amer. Ceram. Soc. 72 (1989) 348.
L. Ewart and S. Suresh, J. Mater. Sci. Lett. 5 (1986) 774.
H. Kishimoto, A. Ueno and H. Kawamoto, in “Mechanical behavior of materials (VI)”, Vol. 2, edited by M. Jono and T. Inoue (Pergamon Press, P. 375. Oxford, 1991).
M. Okazaki, A. J. Mcevily and T. Tanaka, Met. Trans. A 22 (1991) 1425.
G. Choi, S. Horibe and Y. Kawabe, Acta Metall. Mater. 42 (1993) 1407.
R. H. Dauskardt, D. B. Marshall and R. O. Ritchie, J. Amer. Ceram. Soc. 73 (1990) 893.
S.-Y. Liu and I.-W. Chen, ibid. 74 (1991) 1206.
R. H. Dauskardt, M. R. James, J. R. Porter and R. O. Ritchie, ibid. 75 (1992) 759.
R. H Dauskardt, B. J. Dalgleish, D. Yao, R. O. Ritchie and P. T. Becher, J. Mater. Sci. 28 (1993) 3258.
S. Horibe and R. Hirahara, Acta Metall. Mater. 39 (1991) 1309.
A. G. Evans, Int. J. Frac. 16 (1980) 485.
G. Choi, S. Horibe and Y. Kawabe, Acta Metall. Mater. 42 (1994) 3837.
G. Choi and S. Horibe, J. Mater. Sci 28 (1993) 5931.
T. Nose and T. Fujii, J. Amer. Ceram. Soc. 71 (1988) 328.
M. Srinivasan and S. G. Geshadri, Standard testing procedure no. 745 (American Society for Testing and Materials, Easton, Maryland, 1981) P. 46.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Choi, G. Cyclic fatigue crack growth of silicon nitride under a constant maximum stress intensity. J Mater Sci Lett 14, 241–243 (1995). https://doi.org/10.1007/BF00275610
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00275610