References
M. R. Piggott, in “Developments in reinforced plastics”, Vol. 4 (Elsevier Applied Science, London, 1984) P. 131.
Y. M. Tarnopolskii and T. Kincis, in “Static test methods for composites” (Van Nostrand Reinhold, New York, 1985) P. 234.
S. Kumar, W. W. Adams and T. E. Helminiak, J. Reinforced Plast. Compos. 7 (1988) 108.
L. B. Greszczuk, ASTM STP 521 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1973) P. 192.
I. Petker, SAMPE Q. 3 (1972) 7.
L. V. Puchkov, S. L. Bazhenov, A. A. Aslanian, A. M. Kuperman, J. A. Gorbatkina, A. A. Berlin and E. S. Zelenskii, Dokl. Akad. Nauk SSSR 284 (1985) 349 (in Russian).
C. Soutis and N. A. Fleck, J. Compos. Hater. 24 (1990) 536.
H. T. Hahn, in Proceedings of the 6th International Conference on Composite Materials, London, 20–24 July 1987, edited by F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson and J. Morton (Elsevier Applied Science, London, 1987) P. 1.269.
T. V. Parry and A. S. Wronski, J. Hater. Sci. 17 (1982) 893.
C. R. Chaplin, ibid. 12 (1977) 347.
E. G. Guynn and W. L. Bradley, J. Compos. Hater. 23 (1989) 479.
V. V. Kozey, S. L. Bazhenov and A. A. Berlin, in Thesis of 4th USSR Conference on Technology of Composite Structures, 7–10 November 1990, Obninsk (NPO Technology, Obninsk, 1990) P. 34 (in Russian).
A. M. Waas, C. D. Babcock, Jr and W. G. Knauss, ASME Trans. J. Appl. Mech. 57 (1990) 138.
L. B. Greszczuk, AIAA J. 13 (1967) 1131.
B. Budiansky, Comput. Struct. 16 (1983) 3.
S. L. Bazhenov, V. V. Kozey and A. A. Berlin, J. Mater. Sci. 24 (1989) 4509.
J. H. Sinclair and C. C. Chamis, ASTM STP 808 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1983) p.155.
V. V. Kozey, S. L. Bazhenov and A. A. Berlin, in Proceedings of the International Conference “Polymer Composites — 90”, Leningrad, 2–5 September 1990, edited by V. Kestelman (LDNTP, Leningrad, 1990) Pt 1, P. 78.
A. S. Argon, in “Treatise on materials science and technology” (Academic Press, New York, 1972) P. 79.
A. M. Kuperman, N. A. Snigireva, V. V. Kozey, L. V. Puchkov, S. L. Bazhenov and E. S. Zelenskii, in Proceedings of the 15th International Conference “Reinforced plastics — 89”, Carlovy Vary, Czechoslovakia, 1989 (Akademii Nauk CzSSR, Prague, 1989) P. 144.
N. L. Hancox, J. Mater. Sci. 10 (1975) 234.
H. T. Hahn and J. G. Williams, ASTM STP 893 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1986) P. 115.
S. L. Bazhenov, V. V. Kozey and A. A. Berlin, Dokl. Akad. Nauk SSSR 306 (1989) 1123 (in Russian).
B. V. Perov, A. M. Skudra, G. P. Mashinskai and F. I. Bulavs, in “Failure of composite materials”, edited by D. C. Sih and V. P. Tamuzh (Zinatne, Riga, 1979) P. 182 (in Russian).
V. V. Kozey, S. L. Bazhenov, A. A. Berlin, A. M. Kuperman and E. S. Zelenskii, in Thesis of 7th USSR Conference on the Mechanics of Polymers and Composites, Riga, 3–6 May 1990 (Institute of Mechanics of Polymers, Riga, 1990) P. 82 (in Russian).
P. D. Ewins and A. C. Ham, AIAA Paper 74-353 (1974).
S. L. Bazhenov, V. V. Kozey, A. M. Kuperman, E. S. Zelenskii and A. A. Berlin, in Proceedings of the 14th International Conference “Reinforced Plastics — 87”, Carlovy Vary, Czechoslovakia. 15–17 April 1987 (Akademii Nauk CzSSR, Prague, 1987) P. 230.
S. L. Bazhenov and V. V. Kozey, J. Mater. Sci. 26 (1991) 6764.
K. L. Reifsnider and F. Mirzadeh, J. Compos. Technol. Res. 10 (1988) 156.
J. D. Whitcomb, PhD thesis, Virginia Polytechnic Institute and State University (1988).
L. K. English, Mater. Engng 106 (1989) 55.
R. J. Lee, Composites 18 (1987) 35.
H. Schuerch, AIAA J. 4 (1966) 102.
J. R. Lager and R. R. June, J. Compos. Mater. 3 (1969) 48.
L. Shikhmanter, I. Eldror and B. Cina, J. Mater. Sci. 24 (1989) 167.
M. M. Sohi, H. T. Hahn and J. G. Williams, ASTM STP 937 (American Society for Testing and Materials, Philadelphia. Pennsylvania, 1987) P. 37.
M. D. Rhodes, M. M. Mikulas, jr and P. E. Mcgowan, AIAA J. 22 (1984) 1283.
G. A. Cooper, in “Composite materials”, Vol. 5: “Fracture and fatigue”, edited by L. J. Broutman (Academic Press, New York, 1974) P. 106.
J. M. Wolla and J. G. Goree, J. Compos. Mater. 21 (1987) 49.
J. E. Masters, in Proceedings of the 6th International Conference on Composite Materials, London, 20–24, July 1987, edited by F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson and J. Morton (Elsevier Applied Science, London, 1987) P. 3.96.
M. F. Hibbs and W. L. Bradley, ASTM STP 948 (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1987) P. 68.
E. B. Trostianskai, A. S. Grabilnikov and G. V. Komarov, Mech. Compos. Mater. 3 (1985) 443 (in Russian).
R. A. Pearson and A. F. Yee, J. Mater. Sci. 24 (1989) 2571.
V. V. Kozey and B. A. Rosenberg, Polym. Sci. 1 (1992) 919.
Y. N. Huang and D. Hull, Compos. Sci. Technol. 35 (1989) 283.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kozey, V.V. Splitting-related kinking failure mode in unidirectional composites under compressive loading. J Mater Sci Lett 12, 43–47 (1993). https://doi.org/10.1007/BF00275467
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00275467