References
d. lloyd, Int. Mater. Rev. 39 (1994) 1.
j. j. lewandowski, c. liu and w. h. hunt, jr., Mater. Sci. Eng. A107 (1989) 142.
y. flom and r. j. arsnault, Acta Metall. 37 (1989) 2413.
m. taya and r. j. arsnault, “Metal matrix composites. Thermomechanical behavior” (Pergamon Press, New York, 1989).
p. m. singh and j. j. lewandowski, Scripta Met. submitted.
Idem., Met. Trans. A 24A (1993) 2531.
g. a. rozak, j. j. lewandowski, j. f. wallace and a. altmisoglu, J. Composites 26 (1992) 2076.
s. suresh, t. christman and y. sugimura, Script. Metall. 23 (1989) 1599.
p. b. praigell and w. m. 0stobbs, Metal Matrix Composites — Processing, Microstructure and Properties, 12th Riso International Symposium on Metallurgy and Materials Science, edited by H. Hansen et al. (Riso National Lab., Reshilde, Denmark, 1991) p. 603.
m. a. buonanno, r. m. latanision, l. h. hihara and j. f. chiang, “Environmental effects on advanced materials”, edited by R. H. Jones and R. E. Ricker (TMS, Warrendale, PA, 1991) p. 267.
l. dutta, s. m. allen and j. l. hafley, Metall. Trans. A 22A (1991) 2553.
p. p. trazskoma, Corrosion 46 (1990) 402.
r. c. paciej and v. s. agarwala, ibid. 42 (1986) 718.
p. p. trazskoma, e. mccafferty and c. r. crowe, J. Electrochem. Soc. 130 (1983) 1804.
m. metzger and s. g. fishman, Ind. Eng. Chem. Prod. Res. Dev. 22 (1983) 296.
f. mansfeld, s. liu, s. kim and h. shih, Corrosion 45 (1989) 615.
n. j. h. holroyd, Environment Induced Cracking of Metals Proceedings, National Association of Corrosion Engineers, Houston, Texas, (1989) p. 311.
r. h. jones, “Environmental effects on advanced materials”, edited by R. H. Jones and R. E. Ricker (TMS, Warrendale, PA, 1991) p. 283.
a. j. sedriks, j. a. s. green and d. l. novak, Metall. Trans. A 2 (1971) 871.
m. o. speidel, ibid. 6A (1975) 631.
r. n. parkins and p. m. singh, Corrosion 46 (1990) 485.
p. m. singh, “Life prediction of corrodible structures”, edited by R. N. Parkins (National Association of Corrosion Engineers, Houston, Texas, 1994).
r. n. parkins and p. m. singh, “Short fatigue cracks”, ESIS 13, edited by K. J. Miller and E. R. de los Rios (Mechanical Engineering Publications, London, 1992) p. 217.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Singh, P.M., Lewandowski, J.J. Stress corrosion cracking of discontinuously reinforced aluminium (DRA) alloy 2014 during slow strain rate testing. J Mater Sci Lett 15, 490–493 (1996). https://doi.org/10.1007/BF00275410
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00275410