Abstract
This paper presents an accurate finite element procedure to deal with steady state, fully developed and incompressible viscous flow in helical pipes with arbitrary curvatures and torsions. The full Navier-Stokes equations and continuity equation have been explicitly derived using a non-orthogonal helical coordinate system. To obtain the final simultaneous non-linear algebraic equations, a pressure-velocity finite element formulation is formulated based on the Galerkin Method.
The combined influence of finite curvature and finite torsion on the helical flow is studied. The secondary flow patterns and contours of axial velocity of helical flows show the significant distinction with those of toroidal flows. Further, the effect of torsion on flow rates can be neglected.
Several numerical examples are presented. Excellent correlations between the computed results and available referenced solutions can be drawn.
Similar content being viewed by others
References
Berge, S.A.; Talbot, L. (1983): Flow in curved pipes. Ann. Rev. Fluid Mech. 15, 461–512
Chen, W.H.; Tsai, P. (1983): On static and dynamic finite element analysis of helical springs and experimental verifications. J. Chinese Inst. Eng. 6, 17–28
Chen, W.H.; Fan, C.N. (1984): Finite element analysis of incompressible viscous flow in curved pipes. Proc. Fourth Int. Conf. Appl. Num. Modelling, pp 730–734. Taiwan, Republic of China
Dean, W.R. (1927): Note on the motion of fluid in a curved pipe. Philosophical Magazine, J. Sci. 4, 208–222
Dean, W.R. (1928): The stream-line motion of fluid in a curved pipe. Philosophical Magazine, J. Sci. 5, 673–695
Gartling, D. K. (1977): A finite element convergence study for accelerating flow problems. Int. J. Numer. Meth. Eng. 11, 1155–1174
Germano, M. (1982): On the effect of torsion on a helical pipe flow. J. Fluid Mech. 125, 1–8
Humphrey, J.A.C. (1978): Numerical calculating of developing laminar flow in pipes of arbitrary curvature radius. Canada J. Chem. Eng. 56, 151–164
Jackson, C.P., Cliff, K.A. (1981): Mixed interpolation in primitive variable finite element formulation for incompressible flow. Int. J. Numer. Meth. Eng. 17, 1659–1688
Murata, S.; Miyake, Y.; Inaba, T.; Ogawa, H. (1981): Laminar flow in a helically coiled pipe. Bull. JSME 24, 355–362
Sokolnikoff, I.S. (1964): Tensor analysis. New York: Wiley
Taylor, C.; Hood, P. (1974): Navier-Stokes equations using mixed interpolation. Int. Symp. Finite Element Method in Flow Problems, pp. 121–132. Huntsville: Univ. Alabama Press
Wang, C.Y. (1981): On the low-Reynolds-number flow in a helical pipe. J. Fluid Mech. 108, 185–194
Yamada, Y.; Yokouchi, I.Y.; Tamano, T.; Ohtsubo, T. (1975): Finite element analysis of steady fluid and metal flow. In Finite element in fluids, Vol. 1. London: Wiley
Zienkiewicz, O.C. (1977): The finite element method, 3rd ed. New York: McGraw-Hill
Author information
Authors and Affiliations
Additional information
Communicated by S. N. Atluri, February 10, 1986
Rights and permissions
About this article
Cite this article
Chen, W.H., Fan, C.N. Finite element analysis of incompressible viscous flow in a helical pipe. Computational Mechanics 1, 281–292 (1986). https://doi.org/10.1007/BF00273704
Issue Date:
DOI: https://doi.org/10.1007/BF00273704