Summary
Film surface properties and morphology of blends of HDPE with PE-g-PDMS were studied by contact angle, ESCA and SEM measurements. All the results showed clearly the surface enrichment of PDMS segments on the film surface although the difference in the surface tension of the two components is smaller than that between PDMS and hydrophilic polymers. According to the SEM results, the PDMS segments were enriched on the surface in separate domains.
Similar content being viewed by others
References
D. G. LeGrand and G. L. Gaines, Jr., Polym. Prepr., 11(2). 442(1970).
Y. Kawakami, R. A. N. Murthy and Y. Yamashita, Makromol. Chem., 185, 9(1984).
D. W. Dwight, J. E. McGrath, A. R. Beck and J. S. Riffles, Polym. Prepr., 20(1), 702(1979).
R. L. Schmitt, J. A. Gardella, Jr., J. H. Magill, L. Salvati, Jr. and R. L Chin, Macromolecules, 18, 2675(1985).
Weidong Li and Baotong Huang, Polymer Symposium, Chinese Chemical Society, October, 1987, Wuhan; Abstracts of Papers, pp. 710–711; Chinese Patent Application, CN 88 1 02211X.
D. T. Clark, J. Peeling and J. M. O'Malley, J. Polym. Sci., Polym. Chem. Ed., 14, 543(1976).
G. L. Gaines, Jr., Macromolecules, 14, 208(1981).
S. H. Wu, “Polymer Interface and Adhesion”, Marcel Dekker Inc., New York, 1982.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, W., Huang, B. Study on the surface properties and morphology of blends of HDPE/PE-g-PDMS. Polymer Bulletin 20, 531–535 (1988). https://doi.org/10.1007/BF00263668
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00263668