Summary
The crystallization from the glassy state of poly(oxetane) or poly(trimethylene oxide), after quenching the molten polymer in liquid nitrogen, has been studied by differential scanning calorimetry and X-ray diffraction analysis. The results indicate that two crystalline modifications are obtained, depending on the crystallization temperature: the orthorhombic modification is produced when the temperature is higher than −30 °C, while the trigonal form is found below −45 °C, both forms coexisting at intermediate temperatures.
Similar content being viewed by others
References
Tadokoro, H., Takahashi, Y., Chatani, Y., Kakida, H., Makromol. Chem. 109, 96 (1967).
Takahashi, Y., Osaki, Y., Tadokoro, H., J. Polym. Sci. Polym. Phys. Ed. 19, 1153 (1981).
Takahashi, Y., Osaki, Y., Tadokoro, H., J. Polym. Sci. Polym. Phys. Ed. 18, 1863 (1980).
Kakida, H., Makino, D., Chatani, Y., Kobayashi, M., Tadokoro, H., Macromolecules 3, 569 (1970).
Pérez, E., Gómez, M.A., Bello, A., Fatou, J.G., Colloid and Polymer Sci. 261, 571 (1983).
Pérez, E., Bello, A., Fatou, J.G., Merino, J.C., Pastor, J.M., de Saja, J.A., Makromol. Chem. 186, 1731 (1985).
Pérez, E., Bello, A., Fatou, J.G., Colloid and Polymer Sci. 262, 605 (1984).
Pérez, E., Bello, A., Fatou, J.G., An. Quim. (Ser. A) 80, 509 (1984).
Pérez, E., VanderHart, D.L., Polymer 28, 733 (1987).
Pérez, E., Fatou, J.G., Bello, A., Eur. Polym. J. 23, 000 (1987).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pérez, E., Bello, A. & Fatou, J.G. Effect of quenching on the polymorphic crystallization of poly(oxetane). Polymer Bulletin 18, 59–63 (1987). https://doi.org/10.1007/BF00255823
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00255823