Abstract
The aim of the present study is to provide fundamental information regarding the electrochemical formation of Pd-Li alloys and palladium-rare earth alloys in the molten LiCl-KCl system. Pd-Li alloy formation via deposition of lithium onto a palladium electrode in LiCl-KCI eutectic melts was investigated by cyclic voltammetry, open-circuit potentiometry and X-ray diffraction (XRD) analysis. Various phases of Pd-Li alloys, i.e. LiPd7, LiPd2, LiPd and Li2Pd, form at 1.05, 0.64, 0.53 and 0.20V vs Li+/Li at 450°C, respectively. The electrochemical window of the molten LiCl-KCI system thus becomes narrow when palladium is used as a cathode.
Similar content being viewed by others
References
O. Loebich, Jr. and Ch. J. Raub, J. Less-Common Met. 55 (1977) 67.
Ch. J. Raub, Platinum Metals Rev. 28 (1984) 63.
M. L. Doyle and I. R. Harris, Platinum Metals Rev. 32 (1988) 130.
D. T. Hughes and I. R. Harris, J. Less-Common Met. 61 (1978) 9.
G. Xie, K. Ema and Y. Ito, J. Appl. Electrochem. 23 (1993) 753.
K. Amezawa, M. Osugi, Y. Tomii and Y. Ito, Denki Kagaku 61 (1993) 736.
R. A. Sharma and R. N. Seefurth, J. Electrochem. Soc. 123 (1976) 1763.
C. J. Wen, B. A. Boukamp, R. A. Huggins and W. Weppner, ibid. 126 (1979) 2258.
T. Takenaka, Y. Ito and J. Ohisi, Denki Kagaku 53 (1985) 476.
Y. Takeuchi, K. Mochizuki, M. Watanabe and I. Obinata, J. Jpn. Inst. Met. 29 (1966) 801.
J. H. N. Van Vucht and K. H. J. Buschow, J. Less-Common Met. 48 (1976) 345.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nohira, T., Amezawa, K. & Ito, Y. Electrochemical formation of Pd-Li alloys in LiCl-KCl eutectic melts. J Appl Electrochem 25, 48–53 (1995). https://doi.org/10.1007/BF00251264
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00251264