References
Agrawal, Y.; Talbot, L.; Gong, K. 1978: Laser anemometer study of flow development in curved circular pipes. J. Fluid Mech. 85, 497.
Anderson, B. H. 1991: The aerodynamic characteristics of vortex ingestion for the F/A-18 inlet duct. 29th Aerospace Sciences Meeting, AIAA Paper no. 91-0130.
Briley, W. R.; McDonald, H. 1984: Three-dimensional viscous flow with large secondary velocity. J. Fluid Mech. 144, 47.
Horton, G. C. 1989: Predictions of viscous flow in combat aircraft engine air intake ducts. R.A.E. TM P1152.
Humphrey, J. A. C.; Whitelaw, J. H.; Yee, G. 1981: Turbulent flow in a square duct with strong curvature. J. Fluid Mech. 103, 443.
Rojas, J.; Whitelaw, J. H.; Yianneskis, M. 1983: Flow in sigmoid diffusers of moderate curvature. Fourth Symposium on Turbulent Shear Flows, Karlsruhe, Germany.
Schmidt, M. C.; Whitelaw, J. H.; Yianneskis, M. 1986: Flow in out-of plane double S-bends. NASA Contractor Report CR-176981.
Taylor, A. M. K. P., Whitelaw, J. H.; Yianneskis, M. 1982: Curved ducts with strong secondary motion: Velocity measurements of developing laminar and turbulent flow. Trans ASME, J. Fluids Engng. 104, 350.
Vakili, A. D.; Wu, J. M.; Liver, P. A.; Bhat, M. K. 1986: Experimental investigation of secondary flows in a diffusing S-duct with vortex generators. NASA NAG3-233.
Willimer, A. C; Brown, W. R.; Goldsmith, E. L. 1981: Effects of intake geometry on circular pilot intake performance at zero and low forward speeds. Aerodynamics of Power Plant Installation, AGARD CP 301, Paper no. 5.
Yu, S. C. M. 1991: Flow characteristics in S-shaped diffusing ducts. PhD thesis, University of London.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Whitelaw, J.H., Yu, S.C.M. Velocity measurements in an S-shaped diffusing duct. Experiments in Fluids 15, 364–367 (1993). https://doi.org/10.1007/BF00223414
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00223414