Summary
Multivariable irrigation experiments are usually expensive and seldom cover the whole range of desired values. The crossed triple line-source (CTLS) was designed to provide a relatively simple and inexpensive irrigation system for creating continuous gradients of more than one variable. A computer model was developed to assist in evaluating the continuously changing multivariable levels, produced by the CTLS, given various inputs. A single sprinkler's distribution function was used in the model's development. The results of the overlapping sprinkling patterns are calculated throughout the experimental area for water depth, salinity level, and Nitrogen concentration. Measured values of irrigation water electrical conductivity (ECi) and Nitrogen concentration were in good agreement with predicted values.
Similar content being viewed by others
References
Christiansen JE (1941) The uniformity of application of water by sprinkler systems. Agric Eng 22:89
Hanks RJ, Keller J, Rasmussen VP, Wilson GD (1976) Linesource sprinkler for continuous variable irrigation-crop production studies. Soil Sci Soc Am J 40:426
Lauer DA (1983) Line-source sprinkler system for experimentation with sprinkler-applied nitrogen fertilizers. Soil Soc Am 147:124
Magnusson DA, Ben Asher J, De Malach Y (1989) A continuous two variable design using the line-source concept. Agron J 81:132
Seginer I (1987) Spatial water distribution in sprinkle irrigation. In: Hillel D (ed), Vol. 4. Advances in irrigation. Academic Press, New York, p 119
Willardson LS, Oosterhuis DM, Johnson DA (1987) Sprinkler selection for line-source irrigation Systems. Irrig Sci 8:65
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Magnusson, D.A., Asher, J.B. Simulated water and solute distribution from a crossed triple line-source. Irrig Sci 11, 31–36 (1990). https://doi.org/10.1007/BF00189992
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00189992