Abstract
The plane strain behavior of an clasto-plastic cracked plate in tension is examined at two levels of work-hardening. The results are compared to similar data for the case of plane stress
Résumé
Le comportement en état plan de déformation d'une tô1e comportant une fissure et soumise à tension dans le domaine é1asto-plastique est examiné pour deux niveaux de taux d'écrouissage. Les résultats sont comparés à ceux que l'on obtient, dans des conditions similaires, en état plan de tension.
Zusammenfassung
Das Flächenanspannungsverhalten einer elastisch-plastisch gespaltenen Platte unter Spannung wurde in zwei Verfertigungsvorgängen untersucht. Die Ergebnisse warden mit ähnlichen Daten im Bereich von Flächenanspannung verglichen.
Similar content being viewed by others
References
J. L. Swedlow, M. L. Williams and W. H. Yang, Proc. 1st Inter. Conf. Frac., 1 (1966) 259–282.
J. L. Swedlow, Character of the Equations of Elasto-Plastic Flow in Three Independent Variables, Inter. J. Non-Linear Mech., (1968) 3, 325–336.
M. L. Williams, J. Appl. Mech., 24 (March 1957) 1, 109–114
W. F. Brown, Jr. and J. E. Srawley, Plane Strain Crack Toughness Testing of High Strength Metallic Materials, ASTM STP 410, Amer. Soc. for Testing & Materials, Philadelphia, 11 (1966).
J. R. Hutchinson, J. Mech. & Phys. Solids, 16 (1968) 1, 13–32.
A. A. Wells, Brit. Weld. J., 10 (November 1963) 563–570.
M. L. Williams and J. L. Swedlow, Trans. Metall. Soc. AIME, 239 (February 1967) 162–165.
J. L. Swedlow, Inter. J. Frac. Mech., 3 (March 1967) 1, 75–79.
Author information
Authors and Affiliations
Additional information
This work was supported by the National Aeronautics and Space Administration Research Grant NGR-39-002-023.
Rights and permissions
About this article
Cite this article
Swedlow, J.L. Elasto-plastic cracked plates in plane strain. Int J Fract 5, 33–44 (1969). https://doi.org/10.1007/BF00189937
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00189937