References
M. L. Williams, On the Stress Distribution at the Base of a Stationary Crack, Journal of Applied Mechanics, 24 (1957), 109–114.
G. R. Irwin, Analysis of Stresses and Strains near the End of a Crack Traversing a Plate, Journal of Applied Mechanics, 24 (1957), 361–364.
H. W. Liu, Discussion to ‘A Critical Appraisal of Fracture Mechanics’, ASTM-STP 381, ASTM-NASA, (1965) 23–26.
H. W. Liu, Fracture Criteria of Cracked Metallic Plate, International Journal of Fracture Mechanics, 2 (1966) 393–399.
A. A. Wells, Application of Fracture Mechanics At and Beyond General Yielding, British Welding Journal, 10 (1963) 563–570.
H. W. Liu, William J. Gavigan and J. S. Ke, An Engineering Analysis of Ductile Fracture, International Journal of Fracture Mechanics, 6 (1970) 41–53.
W. J. Gavigan, H. W. Liu and J. S. Ke, Local and Gross Deformation in Cracked Metallic Plates and An Engineering Ductile Fracture Analysis, ASME.Paper 71-PVP-52 (1971).
J. R. Rice and A. F. Rosengren, Plane Strain Deformation Near a Crack Tip in a Power Law Hardening Material, Journal of the Mechanics and Physics of Solids, 16 (1968) 1–12.
J. W. Hutchinson, Singular Behavior at the End of a Tensile Crack in a Hardening Material, Journal of the Mechanics and Physics of Solids, 16 (1968) 13–31.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ke, J.S., Liu, H.W. Near tip strain as a ductile fracture criterion. Int J Fract 7, 487–490 (1971). https://doi.org/10.1007/BF00189125
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00189125