Abstract
An analytical determination of the ultimate strength of a typical GRP/PVC sandwich beam has been performed. These beams represent common building practise in marine applications. Equations describing the behaviour of a sandwich panel under beam loading and various failure modes have been developed. The method has been applied to predict the ultimate load for a simple supported sandwich beam. The critical loads have been compared with those from the experimental investigation of a typical bulkhead-to-hull GRP/PVC sandwich T-joint under pull out forces.
Similar content being viewed by others
References
Plantema, F. J., Sandwich Construction, Vol. 3 of Airplane, Missile, and Spacecraft Structures, edited by N. J. Hoff, John Wiley and Sons, Inc., 1966.
Allen, H. G., Analysis and Design of Structural Sandwich Panels, Pergamon, Oxford, 1969.
Froud, G. R., ‘Your Sandwich, Sir’, Composites 11, 1980, 133.
Smith, C.S., Design of Marine Structures in Composite Materials, Elsevier Applied Science, London, 1990.
Maiti, S. K., Ashby M. F. and Gibson, L. J., ‘Fracture Toughness of Brittle Cellular Solids’, Scripta Metallurgica. 18, 1984, 213–217.
Hall, D. J. and Robson, B. L., ‘A Review of the Design and Materials Evaluation Programme for the GRP/Foam Sandwich Composite Hull of the RAN Minehunter’, Composites 15, 1984, 266–276.
Triantafillou, T. C. and Gibson, L. J., ‘Failure Mode Maps for Foam Core Sandwich Beams’, Materials Science and Engineering 95, 1987, 37–53.
Gibson, L. and A. Ashby M. F., Cellular Solids-Structures and Properties, Pergamon Press, 1988.
Fagerheim, G., Moan, T. and Taby, J., ‘Experimental Determination of the Ultimate Strength of GRP/PVC Sandwich T-Connections’, Report, Division of Marine Structures, The Norwegian Institute of Technology, Trondheim, MK/R (December 1989).
Barracuda Technologies, A/S P.O. Box 228, Mye Vakasvei 78, N-1364 Hvalstad, Norway.
Theotokoglou, E. E. and Moan T., ‘Experimental and Numerical Study of Composite T-Joints’, Journal of Composite Materials 30, 1996, 190–209.
Theotokoglou, E. E. and Moan T., ‘Stress Analysis of a GRP/PVC Sandwich T-Joint’, in Proceedings of Eighth International Conference of Composite Materials (ICCM/8), Vol.1, S. W. Tsai and G. S. Springer (eds.), SAMPE, USA, 1991, 9.c.1–9.c.-10.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Theotokoglou, E.E. Analytical determination of the ultimate strength of sandwich beams. Appl Compos Mater 3, 345–353 (1996). https://doi.org/10.1007/BF00134976
Issue Date:
DOI: https://doi.org/10.1007/BF00134976