References
D. Hoeppner, in Forging and Properties of Aerospace Materials, The Metals Society, London (1978) 103–142.
W.J. Evans, in The Practical Implications of Fracture Mechanisms, The Institution of Metallurgists, London (1973) 153–156.
M.J. Harrigan, M.P. Kaplan, and A.W. Sommer, in Fracture Prevention and Control, American Society for Metals, Ohio (1974) 225–253.
P.E. Irving and C.J. Beevers, Materials Science and Engineering 14 (1974) 229–238.
D. Eylon and C.M. Pierce, Metallurgical Transcations 7A (1976) 111–121.
J.C. Chesnutt, C.G. Rhodes, and J.C. Williams, in Fractography-Microscopic Cracking Processes, STP 600, American Society for Testing and Materials, Philadelphia (1976) 99–138.
G.R. Yoder, L.A. Cooley, and T.W. Crooker, Metallurigical Transactions 8A (1977) 1737–1743.
W.J. Evans and A.W. Beale, in Forging and Properties of Aerospace Materials, The Metals Society, London (1978) 170–191.
M. D. Halliday and C. J. Beevers, An Investigation of the Influence of Microstructure, Texture and Environment on the Fatigue Crack Growth Characteristics of α-β Titanium Alloys, Interim report MDH/CJB 3, University of Birmingham (1978).
W. Elber, Engineering Fracture Mechanics 2 (1970) 37–45.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Halliday, M.D., Beevers, C.J. Non-closure of cracks and fatigue crack growth in β heat treated Ti-6A1-4V. Int J Fract 15, R27–R30 (1979). https://doi.org/10.1007/BF00115919
Issue Date:
DOI: https://doi.org/10.1007/BF00115919