Abstract
An elasto-plastic analysis of a compact mode II fracture specimen is performed. Both an approximate approach with rigid plastic material and a more exact elasto-plastic finite element calculation are carried out. From this analysis, an η-factor is determined relating the J-integral to the internal energy measured along the specimen crack faces. It is shown through the finite element computation that it is justifiable to define an η-factor. With this result, it is now possible to perform tests on aluminium specimens so as to determine J IIc.
Similar content being viewed by others
References
L. Banks-Sills and M. Arcan in ASTM STP 905 (1986) 347–363.
J.R.Rice, Journal of Applied Mechanics 35 (1968) 379–386.
1986 Annual Book of ASTM Standards, Vol. 03.01 (1986) 768–786.
J.R. Rice, P.C. Paris, and J.G. Merkle, in ASTM STP 536 (1973) 231–245.
H. Ernst, P.C. Paris, M. Rossow, and J.W. Hutchinson, in ASTM STP 677 (1979) 581–599.
C.E. Turner, in ASTM STP 700 (1980) 314–337.
K.J. Bathe, ADINA-Automatic Dynamic Incremental Nonlinear Analysis, Watertown, MA, USA (1981).
H. Ishikawa, H. Kitagawa, and H. Okamura, in Mechanical Behaviour of Materials, ICM 3, 3, Cambridge, England (1979) 447–455.
H.D.Bui, Journal of the Mechanics and Physics of Solids 31 (1983) 439–448.
L.Banks-Sills and D.Sherman, International Journal of Fracture 32 (1986) 127–140.
T.K.Hellen, in Proceedings of the Third International Conference on Numerical Methods in Fracture Mechanics, A.R.Luxmoore and D.R.J.Owen (eds.) Pineridge Press, Swansea (1983) 395–408.
K.J.Bathe, Finite Element Procedures in Engineering Analysis, Prentice-Hall, Inc., New Jersey, USA (1982) 492–494.
M.E. Karabin and J.L. Swedlow, in ASTM STP 677 (1979) 600–613.
A.Bakker, International Journal of Pressure Vessels and Piping 14 (1983) 1–27.
F.Z.Li, C.F.Shih, and A.Needleman, Engineering Fracture Mechanics 21 (1985) 405–425.
A.Bakker, in Proceedings of the Fourth Advanced Seminar on Fracture Mechanics, Joint Research, Ispra, Italy, L.H.Larsson (ed.), D. Reidel Publishing Co., Dordrecht (1983) 55–83.
P.C. Paris, Hugo Ernst, and C.E. Turner, in ASTM STP 700 (1980) 338–351.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Banks-Sills, L., Sherman, D. Elasto-plastic analysis of a mode II fracture specimen. Int J Fract 46, 105–122 (1990). https://doi.org/10.1007/BF00041998
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00041998