References
H.M. Westergaard, Transactions of the ASME 61 (1939) A49-A53.
H. Tada, P.C. Paris and G.R. Irwin, The Stress Analysis of Cracks Handbook, Del Research Corporation, Hellertown, Pennsylvania (1973) 5.11.
D.L. Chen, B. Weiss and R. Stickler, International Journal of Fracture 55 (1992) R3-R8; 56 (1992) R19-R22; 59 (1993) R53-R57; 61 (1993) R43-R50; 62 (1993) R71-R79; 64 (1993) R89-R96.
D.L. B. Weiss, R. Stickler, A. Hadrboletz and Z.G. Wang, in Proceedings of Materials Science Symposium, D.L. Chen, P. Yong and X.Y. Li (eds.), Chinese Association of Science and Technology in Austria (CASTA), Vienna (1993) 20–31.
D.L. Chen, B. Weiss and R. Stickler, Engineering Fracture Mechanics 48 (1994) 561–571.
M. Sakai, T. Miyajma and M. Inagaki, Composite Science and Technology 40 (1991) 231–250.
C.H. Liu, H.A. Mang, D.L. Chen, B. Weiss and R. Stickler, International Journal of Fracture 63 (1993) R67-R74.
C.H. Liu and D.L. Chen, International Journal of Fracture 66 (1994) R57-R63.
T.M. Guo and G.Y. Lin, Private communications.
C.H. Liu, D.L. Chen, H.A. Mang, B. Weiss and R. Stickler, in Localized Damage III (Computer-Aided Assessment and Control), M.J. Aliabadi, A. Carpinteri, S. Kalisky and D.J. Cartwright (eds.), Computation Mechanics Publications, Southampton, U.K. (1994) 359–366.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chen, D.L., Weiss, B., Stickler, R. et al. Geometric correction factors determined by force balance method for center cracked specimens. IX Loaded by a portion of unsymmetric stresses on the crack. Int J Fract 73, R47–R58 (1995). https://doi.org/10.1007/BF00037650
Issue Date:
DOI: https://doi.org/10.1007/BF00037650