Algal biomass dynamics during colonization of artificial islands: experimental results and a model

Abstract

Algal biomass during colonization of polyurethane foam islands (5.1 cm × 7.6 cm × 7.6 cm) was approximated by measuring chlorophyll a levels on islands after exposure periods of 1, 2, 3, 4, and 6 weeks at six locations in a small lake in central Tennessee, USA. Chlorophyll, ash-free dry weight, and concurrent environmental data were collected for two colonization periods: one in late winter and spring (Set 1), a second in summer (Set 2).

During Set 1 algal biomass levels, as indicated by chlorophyll a, showed a sharp rise initially, but Set 2 islands exhibited a lag period of 7 to 12 days before a rapid increase in algal biomass was noted. Equilibrium chlorophyll a values were similar for both sets. High levels of phaeopigments were found at Stations 2, 3, and 4 during Set 2 resulting in large corrections in chlorophyll a readings. Ash-free dry weight values increased steadily through each colonization period.

A model of biomass accumulation during colonization was constructed postulating three major processes — photosynthesis, respiration, and passive accumulation — which were modulated by three environmental factors — light, temperature, and plankton chlorophyll a levels. For simulations parameter values were taken from the literature where possible. Additional parameter values were set and literature values adjusted when the model was ‘tuned’ to Set 2 data. A simulation with the tuned model using Set 1 environmental input resulted in a good prediction of equilibrium values, but a misinterpretation of initial values. The discrepancy between model predictions and data was alleviated when the passive accumulation rate was increased demonstrating the dependence of biomass values early in colonization on passive accumulation from the plankton.