Abstract
The method of calculating the stress intensity factor (SIF) and the crack opening displacement (COD) for double edge cracks in plates under arbitrary loadings that results in solving a system of Cauchy-type singular integral equations is presented. The improved D-M model is then constructed for edge cracked plates by considering the yielding at the back side. For the cases of tension and bending, the plastic zone sizes and the crack opening displacements are calculated from the improved model solution, and the envelopes for the beginning of backside yielding and ligament yielding are obtained. The numerical results are compared with known solutions which take no account of the yielding at the back side and with experimental results.
Similar content being viewed by others
References
G.G. Chell, Materials Science and Engineering 17 (1975) 227–238.
G.G. Chell, International Journal of Fracture 12 (1976) 33–46.
G.G. Chell, International Journal of Fracture 12 (1976) 135–147.
D.J.F. Ewing and C.E. Richards, Journal of the Mechanics and Physics of Solids 22 (1974) 27.
P.S. Theocaris and N.I. Iaokimidis, Quarterly of Applied Mathematics 35 (1977) 173–183.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yinchu, L., Changqing, G. The improved D-M model solutions for single edge cracked plates by considering the yielding at the back side. Int J Fract 45, 299–309 (1990). https://doi.org/10.1007/BF00036273
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00036273