Abstract
In this paper the general plane problem for a semi-infinite strip fixed at its short end, containing a crack perpendicular to its voundaries is considered. The strip is under the effect of a stamp. By extending the crack to the surfaces, one can reduce the problem to that of c cantilever beam or plate. Integral transform technique is used to provide an exact formulation of this problem, in terms of a system of four singular integral equations one of them being second kind. Stress singularities at the corners of the fixed-end, at the crack tips and at the end points of the contact region undermeath the stamp are obtained from the singular integral equations which are then solved numerically.
Similar content being viewed by others
References
L.M. Keer and W.P. Schonberg, International Journal of Solids and Structures 22 (1986) 87–106.
O.S. Yahşi, ‘Yan Sonsuz Şeritte Çatlak Problemleri ve Ankastre Kirişte Gerilme Dağilimi’, Türkiye Bilimsel ve Teknik Araştirma Kurumu Mühendislik Araştirma Grubu, Proje No: 645 (1985).
H.F. Nied and F. Erdoğan, International Journal of Solids and Structures 1 (1979) 951–965.
F. Erdoğan, in Mechanics Today, S. Nemat-Nasser (ed.), Pergamon Press, Oxford, v. 4 (1978) 1–86.
S. Krenk, Quarterly of Applied Mathematics 33 (1975) 225–232.
G.D. Gupta and F. Erdoğan, Journal of Applied Mechanics 41 (1974) 1001–1006.
Suat Kadioğlu, M.Sc. thesis, Middle East Technical University, Ankara (1989).
N.I. Muskhelishvili, Singular Internal Equations, Noordhoff, Groningen, The Netherlands (1958).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kadioğlu, S., Yahşi, O.S. Indentation of a cantilever beam or plate. Int J Fract 74, 99–130 (1996). https://doi.org/10.1007/BF00036261
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00036261