References
H.A.Ernst, ASTM STP 803 (1983) 191.
H.A. Ernst, ASTM STP 995 (1989) 306.
J.R. Rice, W.J. Drugan and T.L. Sham, ASTM STP 700 (1980) 189.
D.E. McCabe and J.D. Landes, ASTM STP 803 (1983) 562.
D.E. McCabe, J.D. Landes and H.A. Ernst, ASTM STP 803 (1983) 562.
G.P. Gibson, S.G. Druce and C.E. Turner, International Journal of Fracture 32 (1986) 219.
H.A. Ernst, K.H. Schwalbe, D. Hellmann and D.E. McCabe, International Journal of Fracture 37 (1988) 83.
H.A. Ernst, in “Evaluation of Upper Shelf Toughness Requirements for Reactor Pressure Vessels”, Report prepared by Novetech Corporation, Materials Engineering Associates (MEA) and Georgia Institute of Technology for EPRI, March 1989.
E. Smith and T.J. Griesbach, “Assessing a material's susceptibility to constraint and thickness effects using compact tension specimens”, paper prepared for ASTM Constraint Effect in Fracture Symposium, May 1991, Indianapolis, USA.
P.C. Paris, H.A. Ernst and C.E. Turner, ASTM STP 700 (1980) 338.
E. Smith, International Journal of Engineering Science, to be published.
H.A.Ernst, P.C. Paris and J.D. Landes, ASTM STP 743 (1981) 476.
ASTM Annual Book of Standards, ASTM Methods 1152 (1988) Section 3.
E. Smith, unpublished work.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Smith, E. A simple JM expression for a growing crack. Int J Fract 49, R33–R38 (1991). https://doi.org/10.1007/BF00035045
Issue Date:
DOI: https://doi.org/10.1007/BF00035045