Abstract
Weight functions are developed for determining stress intensity factors of cracks along an interface between two linear, elastic materials. As a result of the interface, both mode I and II components will be present for all but very special loading cases. The weight functions are employed to produce exactly the known stress intensity factors of a crack along an interface loaded by tensile and shear point forces.
Similar content being viewed by others
References
J.R. Rice, Journal of Applied Mechanics 55 (1988) 98–103.
J.W. Hutchinson, in Metal-Ceramic Interfaces, Pergamon Press, Oxford (1990) 295–301.
J.R. Rice, Z. Suo, and J.S. Wang, in Metal-Ceramic Interfaces, Pergamon Press, Oxford (1990) 269–294.
H.F. Bueckner, Zenschrift für Angewandte Mathematik und Mechanik 50 (1970) 529–546.
J.R. Rice, International Journal of Solids and Structures 8 (1972) 751–758.
Y. Bortman and L. Banks-Sills, Journal of Applied Mechanics 50 (1983) 907–909. Errata 51 (1984) 711.
Stress Intensity Factor Handbook, Y. Murakami (ed.), Pergamon Press, Oxford (1987) 439.
J.R. Rice and G.C. Sih, Journal of Applied Mechanics 32 (1965) 418–423.
A.H. England, Journal of Applied Mechanics 32 (1965) 400–402.
Author information
Authors and Affiliations
Additional information
Part of this work was carried out while the author was on sabbatical leave at the Materials Laboratory, Wright Patterson Air Force Base, Ohio, USA
Rights and permissions
About this article
Cite this article
Banks-Sills, L. Weight functions for interface cracks. Int J Fract 60, 89–95 (1993). https://doi.org/10.1007/BF00034514
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00034514