Change history
16 March 2021
A Correction to this paper has been published: https://doi.org/10.1007/s10704-021-00524-z
References
J.R. Rice, Journal of Applied Mechanics 35 (1968) 379–386.
J.R. Rice, P.C. Paris, and J.G. Merkle, in Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536 (1973) 231–245.
C.E. Turner, in Fracture Mechanics: Twelfth Conference, ASTM STP 700 (1980) 314–337.
H. Ernst, P.C. Paris, M. Rossow, and J.W. Hutchinson, in Fracture Mechanics, ASTM STP 677 (1979) 581–599.
P.C. Paris, Hugo Ernst, and C.E. Turner, in Fracture Mechanics: Twelfth Conference, ASTM STP 700 (1980) 338–351.
E-561, Standard Practice for R-Curve Determination, and E-813, Standard est Method for JIc, A Measure of Fracture Toughness, Annual Book of ASTM Standards, vol. 03.01, ASTM, Philadelphia (1987).
J.A. Begley and J.D. Landes, Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part II, ASTM STP 514 (1972) 1–20.
J.D. Landes and J.A. Begley, Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part II, ASTM STP 514 (1972) 24–39.
J.W. Hutchinson and P.C. Paris, Elastic-Plastic Fracture, ASTM STP 688 (1979) 37–64.
J.D. Landes and J.A. Begley, Mechanics of Crack Growth, ASTM STP 590 (1976) 128–148.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Paris, A.J., Paris, P.C. Instantaneous evaluation of J and C. Int J Fract 38, R19–R21 (1988). https://doi.org/10.1007/BF00034281
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00034281