References
S. Yang, Y.J. Chao and M.A. Sutton, Acta Mechanica 98 (1993) 79–98.
S. Yang, Y.J. Chao and M.A. Sutton, Engineering Fracture Mechanics 45 (1993) 1–20.
J.W. Hutchinson, Journal of the Mechanics and Physics of Solids 16 (1968) 13–31.
J.R. Rice and G.F. Rosengren, Journal of the Mechanics and Physics of Solids 16 (1968) 1–12.
J.R. Rice, Journal of Applied Mechanics 35 (1968) 379–386.
R.O. Ritchie and A.W. Thompson, Metallurgical Transactions A, 16 (1985) 233–248.
R.O. Ritchie, J.F. Knott and J.R. Rice, Journal of the Mechanics and Physics of Solids 21 (1973) 395–410.
H.W. Liu and T. Zhang, International Journal of Fracture 27 (1985) R87-R91.
H.Deng and T. Wang, in Advances in Fracture Research, ICF7 1 (1989) 323–331.
B.S.-J. Kang, M.S. Dadkhah and A.S. Kobayashi in Proceedings of 1989 Society for Experimental Mechanics 317–322.
B.S. Kang and Q. Liu, in ASTM STP 1131, A. Ernst et al. (eds.) (1992) 222–247.
G. Hans, Ph.D. dissertation, Department of Mechanical Engineering, University of South Carolina (1992).
K.H. Schwalbe, Engineering Fracture Mechanics 42 (1992) 211–219.
J. Chao, S. Yang and M.A. Sutton, “On One and Dual Parameter Controlled Fracture of Solids: Theory and Practice,” submitted for publication.
J. Sun, International Journal of Fracture 54 (1992) 235–242.
C. Hom and R.M. McMeeking, International Journal of Fracture 45 (1990) 103–122.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chao, YJ. On a single parameter controlled fracture of solids under plane stress conditions. Int J Fract 62, R7–R10 (1993). https://doi.org/10.1007/BF00032529
Issue Date:
DOI: https://doi.org/10.1007/BF00032529