Abstract
Acoustic emission sources representing dislocations and cracks under tensile forces, shear forces or a combination of these forces are modelled by a single circular dislocation loop and by a continuous distribution of such loops. The medium is assumed to be linear, elastic isotropic, homogeneous and unbounded. The quasistatic and the point source approximations are assumed. The wave displacement induced by the expansion of a loop and of a continuous distribution of loops is calculated for a tensile and a shear source on the basis of the dynamic dislocation theory by using the Green's function formalism. The wave is given in terms of L-, SV- and SH-waves as a function of the expansion law of the source and is calculated in a simple case. The wave form, radiation pattern and the diameter of the source are calculated; the influence of the expansion time of the source and of the distance between the source and the observation point is discussed. The results are used to check the assumptions of linearity and elasticity. They are compared with experiments and applied to characterise the source from measurements.
Similar content being viewed by others
References
E. Kröner, in Theory of Crystal Defects, Academic Press (1966) 231–256.
K. Aki and P.G. Richards, in Quantitative Seismology, Vol 1, Freeman, San Francisco (1980) Chapters IV and V.
C.B. Scruby, AERE Report-11262 (1984).
D. Rouby, P. Fleischmann and C. Duvergier, Philosophical Magazine 47 (1983) 671–687 and 689–705.
M. Enoki and T. Kishi, International Journal of Fracture 38 (1988) 295–310.
M. Ohtsu and K. Ono, Journal of Acoustic Emission 3 (1984) 27–40.
J.A. Simmons and R.B. Clough, in Dislocation Modelling of Physical Systems, J.P. Hirth and M. Ashby (eds.). Pergamon Press (1981) 464–497.
B. Tirbonod, in Quantitative NDE in the Nuclear Industry, R.B. Clough (ed.), American Society for Metals (1983) 352–354.
T. Ohira and Y.H. Pao, in Metallurgical Transactions A20 (1989) 1105–1114.
Ll. Manõsa, A. Planes, D. Rouby and J.L. Jacqueron, Acta Metallurgica et Materiala 38 (1990) 1635–1641.
Y.T. Chou and J.C.M. Li, in Mathematical Theory of Dislocations, T. Mura (ed.), The American Society of Mechanical Engineers (1969) 116–177.
J.P. Hirth and J. Lothe, in Theory of Dislocations, McGraw-Hill (1968) Section VII.5 and Section IV.3.
R. Burridge and L. Knopoff, in Bulletin of the Seismological Society of America 54 (1964) 1875–1888.
K.Y. Kim and W. Sachse, in International Journal of Fracture 31 (1986) 211–231.
H.N.G. Wadley, C.B. Scruby and G. Shrimpton, Acta Metallurgica 29 (1981) 399–414.
S. Yuyama, T. Imanaka and M. Ohtsu, in Progress in Acoustic Emission III, K. Yamaguchi, K. Aoki and T. Kishi (eds.), The Japanese Society for Non-Destructive Inspection (1986) 732–741.
E. Nadgornyi, in Dislocation Dynamics and Mechanical Properties of Crystals, J.W. Christian, P. Haasen and T.B. Massalki (eds.), Pergamon Press (1988).
F. Erdogan, in Fracture: An Advanced Treatise, H. Liebovietz (ed.), Academic Press, Vol II (1968) 497–590.
C.R. Heiple and S.H. Carpenter, Journal of Acoustic Emission 6 (1987) 177–204.
C.B. Scruby, C. Jones, J.T. Titchmarsh and H.N.G. Wadley, AERE Report-9645 (1980).
T.M. Proctor, Journal of the Acoustical Society of America 71 (1982) 1163–1168.
E. Dieulesaint and D. Royer, in Ondes élastiques dans les Solides Masson et Cie (1974) Section V.2.3.
A.S. Novick and B.S. Berry, in Anelastic Relaxation in Crystalline Solids, Academic Press (1972) Chapter 13.
J.D. Achenbach, K. Irashima and K. Ohno, Journal of Sound and Vibration 89 (1983) 523–532.
B. Tirbonod and L. Hanacek, NDT International 24 (1991) 3–14.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tirbonod, B. Acoustic emission sources modelled by dislocations. Int J Fract 58, 21–53 (1992). https://doi.org/10.1007/BF00019750
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00019750